Highlights
  • FWB-ATAWP01 support one IDE (ATA/ATAPI) device.
Introduction

FWB-ATAWP01 is a FireWire 800 (IEEE 1394b) to ATA bridge with read-only (write protect) function. It allows ATA storage devices to be connected to a FireWire 800 (IEEE 1394b) serial bus in a plug-and-play fashion. The read-only (write protect) function provides the perfect solution for forensic application.FWB-ATA01WP supports primary partition and multiple logical partition.

FWB-ATA01WP supports the following file systems:

  • FAT16, FAT32 and NTFS file system for Window
  • Ext2 and Ext3 file system for Linux
  • Mac OS Standard and Mac OS Extended file system for Mac OS
Technical Specifications

FireWire 800 (IEEE 1394b) to ATA Bridge Board:

  • 1394b PHY: Ti's TSB81BA3 1394 Bus Transfer Rate: 100/200/400/800 Mbps
  • FireWire Ports: Two Biligual-9pin and One FireWire-6pinComplies with T13's ATA/ATAPI-7 d1532r2, Vol. 1 & 2:
    • PIO Mode 0 ~ 4
    • Multiword DMA Mode 0 ~ 2
    • Ultra DMA Mode 2, 4, 5, 6
  • Supports 48-bit addressing for large hard drives (>128GB)IDE (ATA) Interface: IDC 2X20 Male Connector
  • Support for ATA devices configured either as master or slave.
  • Provide Dual Color LED to indicate Power & Disk Activity.Self Powered Mode Of Operation
  • DC Power Input: mini 4-pin (+12V, GND, GND, +5V) FDD like Power Connector
Physical Dimensions
  • 9.5cm (W) x 6.3cm (L) x 2.8cm (H)
Hardware Requirement
  • Desktop PC: with either a built-in FireWire (IEEE 1394) controller or a FireWire (IEEE 1394) to PCI Host Adapter equipped with a external FireWire (IEEE 1394) port.
  • Laptop PC: with either a built-in FireWire (IEEE 1394) controller or a FireWire (IEEE 1394) to CardBus PC Card equipped with a external FireWire (IEEE 1394) port.
Operating System Requirements
  • Windows 98SE/ME/2000/XP/2003/7; MacOS X or higher; Linux
  • Driver Requirements
    • FireWire:
      • No driver installation for Windows 98SE, ME, 2000, XP, 2003, 7, Mac OS and Linux
Applications
  • The read-only (write protect) function provides the perfect solution for anti-virus, hacker prevention and forensic application.
Kit includes
  • FWB-ATAWP01 Bridge Board
  • FireWire 6pin-to-6pin Cable (1.0m length).
  • Beta 9pin -to- 9pin Cable (1.0m length)
  • Ultra DMA100 Cable
  • Y-Shape DC Power Cable (Red, Black, Black, Yellow) with power connectors (two FDD like mini 4pin and one IDE big 4pin female plug)
  • DCS1-1205 Power Switch
  • AC 100 ~ 240 V to DC +5V/2A and +12V/2A Power Adapter
    • Input: Full Range 100 ~ 240 V, 1.2A 50 ~ 60HzOutput: DC +5V/2A and +12V/2A
    • Power Max. 34 Watt
    • Safety: UL/CSA/TUV/BSMI
  • AC power cord (Length: 6 feet)
  • User's Guide