Highlights
  • U2EIDE01S support two IDE (ATA/ATAPI) devices.
Introduction

It is ideally suitable for tailgating removable-media devices such as CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-RAM, tape drive, and hard disk drive. It allows IDE drives (master and slave) to connect to USB 2.0 serial bus in a plug-and-play fashion.

Both ATA and ATAPI devices are supported with the same firmware.

Technical Specifications

USB 2.0 to IDE (ATA/ATAPI) Bridge Board: Cypress CY7C68300C

  • USB 2.0 interface: one USB B-type connector
  • USB bus transfer rate: high speed (480 Mbit) or full speed (12 Mbit)
  • USB-IF Certified Compliant for USB 2.0 (Test ID Number: 40490119)
  • USB bus power: self-powered mode operation
  • Complies with T13's ATA/ATAPI-6 draft specification
    • PIO mode 0, 3, 4
    • Multiword DMA Mode 2 
    • Ultra DMA mode 2, 3, 4
    • Supports 48-bit addressing for large hard drives (>128GB).
  • IDE (ATA/ATAPI) Interface: Male IDC 2X20 Connector
  • The IDE (ATA/ATAPI) port supports multi-LUN function for attaching two (Master and Slave) IDE devices.
  • Both ATA and ATAPI devices are supported using the same firmware.
  • Power indicator LED and HDD Access LED
  • SCSI I 50pin Low Density Centronics Connector Form Factor (Fit to most standard SCSI enclosure)
Applications
  • Two IDE (ATA/ATAPI) drives.
  • One IDE (ATA/ATAPI) .
Hardware Requirements
  • Desktop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
  • Laptop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.
Operating System Requirements
  • Windows 98SE/ME/2000/XP/2003; MacOS 9.1 or higher; Linux
  • Driver Requirements
    • USB:
      • No driver installation for Windows ME, 2000, XP, 2003, Mac OS and Linux.
      • Driver available for Window 98 SE
Kit includes
  • Kit 1:
    • U2EIDEI01S Bridge Board
    • CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
      one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
  • Kit 2:
    • U2EIDEI01S Bridge Board
    • CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
      one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
    • CB-00127- Ultra DMA100 Cable in length of 6 inch (for one device).
  • Kit 3:
    • U2EIDEI01S Bridge Board
    • CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
      one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
    • CB-00247 - Ultra DMA100 Cable in length of 12 inch (for one device).
  • Kit 4:
    • U2EIDEI01S Bridge Board
    • CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
      one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
    • CB-00251 (CB-000068) - Ultra DMA100 Cable in length of 18 inch (for one device).
  • Kit 5:
    • U2EIDEI01S Bridge Board
    • CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
      one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
    • CB-00128 (CB-000030) - Ultra DMA100 Cable 12+6 inch for two devices (Master & Slave).
  • Kit 6:
    • U2EIDEI01S Bridge Board
    • CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
      one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
    • CB-00128 (CB-000030) - Ultra DMA100 Cable 12+6 inch for two devices (Master & Slave).
    • CB-00175 (CB-U00025) - A Plug -to- B Plug USB 2.0 cable in length of 1.0m