UF2DSATA01 is dual Mode Bridge Board.

• Device Mode: USB 2.0 & FireWire400 (IEEE 1394a) ComBo to Dual SATA Bridge Board
• Host Mode: eSATA, FireWire400 (IEEE 1394a) & USB 2.0 ComBo to SATA Bridge Board

Device Mode: USB 2.0 & FireWire (IEEE 1394a) ComBo to Dual SATA RAID Bridge Board:

• DC Power Connector: Mini 4-pin Floppy Disk Drive like power connector.
• USB 2.0 Port: One USB B-Type connector
• USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
• USB Bus Power: Self Powered Mode Operation
• FireWire Port:: Two FireWire (IEEE 1394a) 6pin Connectors
• 1394a PHY: Ti's TSB41AB2 1394a-2000 400Mbps PHY
• 1394 Bus Transfer Rate: 100/200/400 Mbps
• SATA Port: Two SATA Signal 7pin Connectors
• SATA Transfer Rate: 150Mbytes/s
• RAID
  • RAID 0 (Striping): for two disks with same capacity.
  • Disk Spanning: for two disks with different capacity.
  • RAID 1 (Mirroring): for two disks with same capacity.
• Provide pin header for Power indicator LED and SATA Access LED
• SCSI I 50pin Low Density Centronics Connector Form Factor
  (Fit to most standard SCSI enclosure)

Host Mode: eSATA, FireWire400 (IEEE 1394a) & USB 2.0 ComBo to SATA Bridge Board:

For Host Mode it needs a CB-00358 Reverse Type eSATA Cable.
Please refer to the application illustration below.

• eSATA Port: One eSATA Signal 7pin Receptacle Connector
• SATA Transfer Rate: 150Mbytes/s
• FireWire Ports: Two FireWire (IEEE 1394a) 6pin Connectors
• 1394 Bus Transfer Rate: 100/200/400Mbps
• USB 2.0 Port: One USB B-Type connector
• USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
• SATA Port: One SATA Signal 7pin Latch Connector
• SATA Transfer Rate: 150Mbytes/s
• Provide pin header for Power indicator LED and SATA Access LED
• SCSI I 50pin Low Density Centronics Connector Form Factor
  (Fit to most standard SCSI enclosure)

• 8.45cm (W) x 1.97cm (H) x 5.22cm(D)

• Desktop PC: with either a built-in FireWire400 (IEEE 1394a) controller or a FireWire400 (IEEE 1394a) to PCI Host Adapter equipped with a external FireWire400 (IEEE 1394a) port.
• Desktop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
• Desktop PC: with either a built-in SATA controller or an SATA to PCI Host Adapter equipped with a external SATA port.
• Laptop PC: with either a built-in FireWire400 (IEEE 1394a) controller or a FireWire400 (IEEE 1394a) to CardBus PC Card equipped with a external FireWire400 (IEEE 1394a) port.
• Laptop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.
• Laptop PC: with either a built-in SATA controller or an SATA to CardBus PC Card equipped with a external SATA port.

• Windows ME/2000/XP/2003/Vista/7; MacOS 9.1 or higher; Linux
• Driver Requirements
  • USB:
    • No driver installation for Windows ME, 2000, XP, 2003, Vista, 7, Mac OS and Linux.
  • FireWire:
    • No driver installation for Windows ME, 2000, XP, 2003, Vista, 7, Mac OS and Linux

• Device Mode:

• Host Mode:

ESATA-ECS-1R --- eSATA 7pin receptacle to SATA 7pin plug (Reverse Type) signal extension cable (CB-00358) with SCSI 1 connector Form Factor Bracket(BR-00116).

ESATA-ECS-2R --- RJ45 Connector + eSATA 7pin receptacle to SATA 7pin plug (Reverse Type) signal extension cable (CB-00358) with SCSI 1 connector Form Factor Bracket (BR-00184).
BR-00184 was designed to hold one CB-00324 and one RJ45 receptacle port PCBA which come with Areca ARC5030 RAID subsystem.

• UF2DSATA01 bridge board.
• User's Manual

Option:

Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug . (CB-00072)
eSATA 7pin receptacle to SATA 7pin plug signal extension cable (CB-00358) with SCSI 1 50pin low density Centronics connector form factor bracket (BR-00116).