FWBU2DSATA11 is dual Mode (Device Mode or Host Mode) Bridge Board featuring Oxford OXUF934DSB.

Device Mode: FireWire800 (IEEE 1394b) & USB 2.0 ComBo to Dual SATA Bridge Board

FWBU2DSATA11 is a selectable hardware RAID Bridge Board for two SATA HDDs. A true hardware solution, FWBU2DSATA11 requires no software to be installed on your machine.

It provides 3 hardware RAID mode:

• RAID 0 (Striping): for two disks with same capacity.
• Spanning: for two disks with different capacity.
• Non-RAID (JBOD).

RAID 0 (Striping) and Spanning:
By striping/ spanning technique, FWBU2DSATA11 integrates two HDDs into a big drive.

Host Mode: eSATA, FireWire800 (IEEE 1394b) & USB 2.0 ComBo to Single SATA Bridge Board

FWBU2DSATA11 provides three host interface for connecting the computer. 

• DC Power Connector: Mini 4-pin Floppy Disk Drive like power connector.
• USB 2.0 Port: One USB B-Type connector
• USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
• USB Bus Power: Self Powered Mode Operation
• FireWire Port:: Two Bilingual (IEEE 1394b) Connectors
• 1394b PHY: Ti's TSB81BA3D
• 1394 Bus Transfer Rate: 100/200/400/800 Mbps
• SATA Port: Two SATA Signal 7pin Connectors
• SATA Transfer Rate: 150Mbytes/s
• Provide pin header for Power indicator LED and SATA Access LED
• RAID (Device Mode)
  • RAID 0 (Striping) for two disks.
  • Disk Spanning for two disks.
• eSATA (Host Mode): Attach CB-00358 to CON1.
  Note: For Host Mode it needs a CB-00358 Reverse Type eSATA Cable.

ESATA-ECS-1R ---e-SATA 7pin receptacle to SATA 7pin plug (Reverse Type) signal extension cable (CB-00358) with SCSI 1 connector Form Factor Bracket (BR-00116)

ESATA-ECS-2R ---e-SATA 7pin receptacle to SATA 7pin plug (Reverse Type) signal extension cable (CB-00358) with SCSI 1 connector Form Factor Bracket (BR-00184).
BR-00184 was designed to hold one CB-00358 and one RJ45 receptacle port PCBA which come with Areca ARC5030 RAID subsystem.

• SCSI I 50pin Low Density Centronics Connector Form Factor
  (Fit to most standard SCSI enclosure)
• 8.45cm (W) x 2.16cm (H) x 6.01cm(D)

• Desktop PC: with either a built-in FireWire800 (IEEE 1394b) controller or a FireWire800 (IEEE 1394b) to PCI Host Adapter equipped with a external FireWire800 (IEEE 1394b) port.
• Desktop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
• Desktop PC: with either a built-in SATA controller or an SATA to PCI Host Adapter equipped with a external SATA port.
• Laptop PC: with either a built-in FireWire800 (IEEE 1394b) controller or a FireWire800 (IEEE 1394b) to CardBus PC Card equipped with a external FireWire800 (IEEE 1394b) port.
• Laptop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.
• Laptop PC: with either a built-in SATA controller or an SATA to CardBus PC Card equipped with a external SATA port.

• Windows ME/2000/XP/2003/7; Mac OS 9.1 or higher; Linux
• Driver Requirements
  • USB:
    • No driver installation for Windows ME, 2000, XP, 2003, Vista, 7, Mac OS and Linux.
  • FireWire:
    • No driver installation for Windows ME, 2000, XP, 2003, 7, Mac OS and Linux.

• FWBU2DSATA11 bridge board.
• CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
  one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
• User's Manual

Option:

e-SATA 7pin receptacle to SATA 7pin plug (Reverse Type) signal extension cable (CB-00358) with SCSI 1 connector Form Factor Bracket BR-00184. BR-00184 was designed to hold one CB-00358 and one RJ45 receptacle port PCBA which come with Areca ARC5030 RAID subsystem.
eSATA 7pin receptacle to SATA 7pin plug signal extension cable (CB-00358) with SCSI 1 50pin low density Centronics connector form factor bracket (BR-00116).