Introduction

S2-CF01 is a SATA to CF (Compact Flash) bridge board. It’s ideally suited for tailgate interface applications for converting CF memory card to Serial ATA storage device.

S2-CF01 enables CF memory card to be used as a direct replacement for a 2.5" SATA hard drive. As a result, any equipment, such as Notebook computer, that uses a 2.5" SATA hard drive can be easily converted to use the low power and shock resistant CF memory card.

Feature
  • Enable CF memory card to be used like standard 2.5" SATA hard drive
  • SATA interface
  • Supports Serial ATA Generation 2 transfer rate of 3.0 Gbp/s
  • Supports connection to Port Multiplier or Hardware Port Multiplier
  • Mounts directly onto notebook 2.5" SATA connector
  • CF Card can be the primary bootable device containing the OS and applications.
  • Transparent to the operating system and does not require any drivers
Technical Specifications
  • SATA Interface:
    • SATA 7+15pin male connector
    • Serial ATA Generation 2 transfer rate of 3.0 Gbp/s
    • SATA power save modes.
    • SATA hot-plug.
    • SATA II-standard Set Features for disabling device-initiated SATA power
  • Media Interface: CF(Compact Flash)
    • CompactFlashTM cards (Type I & II)
  • AT Attachment with Packet Interface Extension (ATA/ATAPI-7) Compliant:
    • ATA/ATAPI PIO mode data transfer.
    • ATA/ATAPI UDMA data transfer rates of 16.7, 25, 33, 44, 66, 100, 133, and 150 MB/s.
    • ATA/ATAPI PACKET Command feature set which supports INF-8090i packet commands.
    • Tagged command queuing (maximum 32 entries).
    • ATA/ATAPI-7 streaming feature set.
    • ATA/ATAPI-7 Force Unit Access commands.
    • ATA/ATAPI 48-bit Address feature set.
  • Jumper for selecting 1.5Gbp/s or 3.0Gbp/s.
Applications
  • With 2.5" HDD frame bracket (Model No: S2CF01-25)

  • With 3.5" HDD & FDD form factor bracket (Model No: S2CF01-35)

3.5" HDD Form Factor
3.5" FDD Form Factor

Physical Dimensions
  • 53.5mm x 74mm(2" x2.91 ")
  • Direct Connect Vertical type
Kit includes

Kit 1:

  • S2-CF01 - SATA to CF Bridge Board
  • User's Manual
Kit 2:
  • S2-CF01 - SATA to CF Bridge Board
  • 2.5" HDD Frame Bracket
  • Screws for mounting
  • User's Manual

Kit 3:

  • S2-CF01 - SATA to CF Bridge Board
  • 3.5" HDD&FDD Frame Bracket
  • Screws for mounting
  • User's Manual