UFS-QSH01 RAID Kitcombines two key components:
1). UFS-QSH01 --- e-SATA, FireWire800 (IEEE 1394b) & USB 2.0 to Quad SATA RAID Bridge Board
2). LS0001E --- LCD Module for UFS-QSH01

UFS-QSH01 RAID Kit is an universal interface (USB2.0/FireWire/eSATA) to quad-SATA bridge device with integrated hardware RAID controller, which supports a range of RAID levels and storage applications targeted at users requiring maximum performance, reliability and ease of use.

UFS-QSH01 RAID Kit delivers the performance required for servers and I/O demanding applications such as Video-On-Demand, database servers, workstations, high-end desktops, and image systems.

UFS-QSH01 RAID Kit allows one HDD failure without impact on the existing data and failed drive rebuild is transparent to the host.

UFS-QSH01 RAID Kit  combines two key components:

1). UFS-QSH01 --- e-SATA, FireWire800 (IEEE 1394b) & USB 2.0 to Quad SATA RAID Bridge Board
2). LS0001E --- LCD Module for UFS-QSH01

e-SATA, FireWire800 (IEEE 1394b) & USB 2.0 to Quad SATA RAID Bridge Board

• USB 2.0 Interface
  • USB 2.0 Port: One USB B-Type connector for UFS-QSH01-ENP
  • USB 2.0 Port: One JST Compatible 5pin wafer (pitch = 2.0 mm) for UFS-QSH01-INP
  • USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
  • USB Bus Power: Self Powered Mode Operation
• FireWire Interface
  • FireWire Port: Two Bilingual (IEEE 1394b) Connectors and one FireWire (IEEE 1394a) Connector
  • 1394b PHY: Ti's TSB81BA3D
  • 1394 Bus Transfer Rate: 100/200/400/800 Mbps
• eSATA Interface
  • eSATA 7pin Connector
  • 3-GHz SATA II SERDES device
  • Button-push/control over eSATA
  • Hardware command processing for optimum performance
  • Software command processing for maximum product differentiation
  • Jumper for selecting 1.5Gbp/s or 3.0Gbp/s
• SATA 4-port embedded host
  • SATA Drive Port: Four SATA Signal 7pin Latch Type Connectors
  • SATA Transfer Rate: 300Mbytes/s
  • 3-GHz SATA II SERDES host
  • Supports SATA HDD ATA 7
  • Supports storage with more than 2 TB per Volume
• Hardware RAID controller supporting RAID 0,1,10,3 & 5 over USB, 1394 & eSATA
  
  • Disk striping with distributed parity (RAID 5)
  • Disk striping with dedicated parity (RAID 3)
  • Disk striping (RAID 0) for maximum performance
  • Disk striping with mirroring (RAID 10)
  • Disk spanning for large capacity single volume
  • Support Hot-Standby support (for 3 disk RAID3 and RAID 5)
• Hardware acceleration of RAID rebuild
  • Performance in excess of 200 GBytes/hr
• Fast, reliable advanced encryption standard (AES) encryption/decryption facilities
  • Supports AES ECB mode
  • Data is stored encrypted on the disk when the system is authenticated, & cannot be accessed from the host without authentication
  • 128-bit encryption key
  • Data is encrypted in real time using a hardware engine
  • Supports secure password & biometric authentication
  • Supports software generation & use of the key
  • 2 software-driven authentication LEDs
• 18-Kbyte buffer for USB or FireWire data maximizes performance by double-buffering 4-Kbyte packets
• DC Power Connector
  • Mini 4-pin Floppy Disk Drive like power Connector
• Provides pin header for LEDs
  • Activity LEDs
  • Health LEDs
  • Activeness LEDs
• Provides pin header for assembling LCD Module.

LS0001E --- LCD Module for UFS-QSH01

• Monitors:
• RAID Mode and Status
• Error Statistics
• SMART Status
• Enclosure Status (Fan speed and temperature)
• Disk temperature
• RAID Status Select Button:
  • Button 1: To next item
  • Button 2: Enter to item

UFS-QSH01-ENP Kit	UFS-QSH01-INP Kit

• UFS-QSH01-ENP Kit : USB B-Type connector
• UFS-QSH01-INP Kit : JST Compatible 5pin wafer (pitch = 2.0 mm)

• SCSI I 50pin Low Density Centronics Connector Form Factor
  (Fit to most standard SCSI enclosure)
• 112mm (W) x 21.56mm (H) x 79.78mm(D)

LCD Module

• 5.25” ODD (Optical Disk Drive) form factor
• 146.6mm (W ) x 42mm (H) x 65 mm (D)

• 322.7g

• Desktop PC / Laptop PC: with either eSATA or FireWire (IEEE 1394) or USB ports.

• Windows ME/2000/XP/2003/7; Mac OS 9.1 or higher; Linux
• Driver Requirements
  • No additional 1394 host drivers are required, for either Windows or Mac operating systems for standard storage applications.
  • No additional USB host drivers are required, for either Windows or Mac operating systems, for standard storage applications.
• RAID Configurator: The Oxford configurator runs on the following systems:
  • Windows System
    • Windows 98 SE/ME
    • Windows 2000 with Update Rollup patch applied
    • Windows XP SP2
    • Windows Vista (Only for USB & eSATA Port)
    • Windows 7
  • Macintosh systems
    • Mac OS 10.3 (Power PC)
    • Mac OS 10.4 (Intel), Mac OS 10.4 (Power PC)

• UFS-QSH01 bridge board.
• LS0001E --- LCD Module for UFS-QSH01
• CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
  one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
• CB-00449--- IDC Cable (pitch:2.54mm 2x12pin) L=60cm
• User's Manual
• CD-title (RAID Configurator)

under construction