• U2-ATAE40 support one IDE device.
• 128-bit AES(Advanced Encryption Standard) Encryption.
• IDE interface
• CompactFlash V3.0 Drives (UDMA enabled 266X Speed).
• For Windows and Mac

The U2-ATAE40 with 128-bit, hardware-encrypted security for use with UDMA CompactFlash (CF) memory or IDE/ATAPI Hard Disk Drives using a USB 2.0 interface. The hardware encryption/decryption function, which is fully compliant with the Advanced Encryption Standard(AES), combines with two-level software authentication of passwords to prevent unauthorized access of memory content.

Any unauthorized attempt to decipher the U2-ATAE40's keys is virtually impossible as it would take 149 trillion years to determine all possibilities at an attempted recovery rate of one key per second. This extraordinary level of security is attributed to the 3.4x1038 possible options the U2-ATAE40 offers to code keys.

The U2-ATAE40 can be configured to manage either a USB-to-CF or USB-to-IDE/ATA interface, but not both simultaneously.

• U2-ATAE40 meets the USB specification V2.0 and V1.1.
• IDE Hard Disk Drives/ Removable IDE Hard Disk Drives
• Supports upto ATA-7 Specification:
  • PIO Mode 0 ~ 6
  • Multiword DMA Mode 0 ~ 2
  • Ultra DMA Mode 0 ~ 4  
• Supports Hard drives of up to 2048GB (2TeraBytes).

• CompactFlash/ Microdrive
  • Supports upto ATA-7 Specification:
    • PIO Mode 0 ~ 6
    • Multiword DMA Mode 0 ~ 2
    • Ultra DMA Mode 0 ~ 4 
  • Supports IBM, Segate, Hitachi and Magistor Hard disk based CF media
  • ROM has built in support for SHA-256 based authentication

• Security, Authentication and Encryption
  • 128-bit AES Encryption.
  • Data is stored encrypted in memory to prevent reading information directly from memory.
  • Encryption/ Decryption function is embedded in the chip for maximum security.
  • Access only by password that is stored in digest form.
  • Device includes Two Level Security application software for password authentication.

• 6.40cm x 3.70cm x 2.87cm
• Direct Connect Vertical type

• Desktop PC / Laptop PC: with USB (1.0 or 2.0) Host Controller.

• To turn your ATA/ATAPI Device to USB 2.0 Device

  This allows peripheral vendors a unique opportunity to continue the advantage of the ATA/ATAPI economies of scale while presenting U2-ATAE40 into the rapidly expanding USB 2.0 markets. End users using USB 2.0 interface now have an immediate and no-risk solution for adding ATA/ATAPI devices to their computer.

• Windows 98SE/ME/2000/XP/2003; MacOS 9.1 or higher; Linux
• Driver Requirements
  • USB:
    • No driver installation for Windows ME, 2000, XP, 2003, Mac OS and Linux.
    • Driver available for Window 98 SE

• Kit 1:
  • U2-ATAE40 Bridge Board
  • CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
    one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
  • Manual
  • CD title (Encryption Utility)
• Kit 2:
  • U2-ATAE40 Bridge Board
  • CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
    one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
  • Manual
  • CD title (Encryption Utility)
  • CB-00175 - A Plug -to- B Plug USB 2.0 cable in length of 1.0m