• Supports both HDD and ODD
• Supports HDD security feature
• SCSI I 50pin Low Density Centronics Connector Form Factor
• Supports Serial ATA Port Multiplier with command base
• SATA Latch Type Connector

U2-SATA14 is an USB 2.0 to SATA bridge board. It has an USB high-speed device port and a SATA 1.5Gb/s host port. It receives standard Mass Storage Device Class (MSDC) SCSI commands from the USB host and translate them into ATA/ATAPI commands to the SATA device. The maximum throughput can goes up to 30MB/sec.

USB to SATA Bridge Board

• USB 2.0:
  • Compliant with USB 2.0 specifications and passes USB certification
  • Supports USB high speed (480Mbps) and full speed (12Mbps) transfer rates
  • Supports Mass Storage Device Class bulk only transfer
  • Supports USB vendor commands (Control Endpoint) and SCSI vendor commands
  • Supports USB host controller in UHCI, OHCI, EHCI modes
• Serial ATA:
  • Compliant with Serial-ATA 1.0A specifications
  • Supports Serial-ATA generation 1 transfer rate of 1.5Gb/s
• Provides pin header for Power and SATA Activity Indicator LEDs
• Supports HDD security feature (with LockHDD Utility)
• DC Power Input:
  • FDD like mini 4pin DC Power Connector

• 83.3mm x 33.85mm x 28.2mm
• SCSI I 50pin Low Density Centronics Connector Form Factor
  (Fits to most standard SCSI enclosures)

• Desktop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to PCI Host Adapter equipped with an external USB port
• Laptop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to CardBus PC Card equipped with an external USB port

• Windows ME/2000/XP/2003; MacOS 10 or higher; Linux
• Driver Requirements
  • USB:
    • No driver installation for Windows ME, 2000, XP, 2003, Mac OS and Linux.

• U2-SATA14 Bridge Board
• CB-00072--- Y-Shape DC Power Cable (Red, Black, Black, Yellow) with three power connectors
  one FDD like mini 4pin, one IDE big 4pin male plug and one IDE big 4pin female plug
• User's Guide

• RoHS Test : Pass