• Supports USB Super-Speed/High-Speed/Full-Speed
• Supports ATAPI Device (Blu-ray / DVD / CD)
• Power
  • U3-SATA210-22: Self-Powered (Needs DC Power Input from Big IDE 4-pin DC Power Connector)
  • U3-SATA210-7: Bus-Powered

U3-SATA210 is USB 3.0 to SATA II (3Gb/s) Bridge Board. It has an USB SuperSpeed device port and a SATA II (3Gbps) host port.

U3-SATA210 translates the communication protocol between SATA II (3Gb/s) and SuperSpeed USB commands.
Supports the USB Mass Storage Class Bulk-Only Transport Specification.

USB to SATA Bridge Board

• Spread Spectrum Controller Integrated for USB & SATA
• Compliant with USB3.0 Specification Revision 1.0
• Compliant with USB Specification Revision 2.0
• Supports USB Super-Speed/High-Speed/Full-Speed Operation
• Supports USB Mass Storage Class, Bulk-Only Transport Specification Revision 1.3
• Supports external SPI NVRAM for Vendor VID/PID of USB2.0/USB3.0 device controller
• Complies with Serial ATA Specification Revision 2.6
• Support SATA Hot-Plug
• Support ATA/ATAPI Packet Command Set
• Support ATA/ATAPI LBA48 addressing mode
• Support SATA 3Gbps (Gen2i) / 1.5Gbps (Gen1i)
• Support ATAPI Device (Blu-ray / DVD / CD)
• LEDs:
  • Provides Power LEDs
  • Power Indicator LEDs Header
• Power
  • U3-SATA210-22: Self-Powered (Needs DC Power Input from Big IDE 4-pin DC Power Connector)
  • U3-SATA210-7: Bus-Powered

• U3-SATA210-7: 83.3mm x 21.56mm x 38.6mm
• U3-SATA210-22 : 83.3mm x 21.56mm x 44.1mm
• SCSI 1 50pin Low Density Centronics Connector Form Factor. (Fit to most standard SCSI enclosure)

• Desktop PC: with either a built-in USB (1.0 or 2.0 or 3.0) controller or an USB (1.0 or 2.0 or 3.0) to PCI Host Adapter equipped with an external USB port.
• Laptop PC: with either a built-in USB (1.0 or 2.0 or 3.0) controller or an USB (1.0 or 2.0 or 3.0) to CardBus PC Card equipped with an external USB port.

• U3-SATA210 Bridge Board
• User's Guide