• Supports USB Super-Speed/High-Speed/Full-Speed
• Provides Jumper for Read-only (Write Protect) or Read/Write selection
• Power
  • U3-SATA312-22: Self-Powered (Needs DC Power Input from Big IDE 4-pin DC Power Connector)
  • U3-SATA312-7: Bus-Powered

U3-SATA312 is USB 3.0 to SATA IlI (6Gb/s) Bridge Board. It has an USB SuperSpeed device port and a SATA III (6Gbps) host port.

U3-SATA312 translates the communication protocol between SATA III (6Gb/s) and SuperSpeed USB commands. Supports the USB Mass Storage Class Bulk-Only Transport Specification.

U3-SATA312 provides a Jumper which allow user to set the function for selecting SATA Read-only (Write Protect) or Read/Write.

USB to SATA Bridge Board

• Support Spread Spectrum Control of USB3.0 and SATA interface to improve the EMI performance
• Compliant with USB3.0 Specification Revision 1.0
• Compliant with USB Specification Revision 2.0
• Supports USB Super-Speed/High-Speed/Full-Speed Operation
• Supports USB Mass Storage Class, Bulk-Only Transport Specification Revision 1.3
• Support UASP( USB Attached SCSI Protocol) Specification Revision 1.0
• Complies with Serial ATA Specification Revision 2.6
• Support SATA 6Gbps (Gen3i)/ 3Gbps (Gen2i) / 1.5Gbps (Gen1i)
• Support SATA Hot-Plug
• Support ATA/ATAPI Packet Command Set
• Support ATA/ATAPI LBA48 addressing mode
• Integrated 8-bit micro-processor with embedded program RAM and ROM
• Support SPI NVRAM for Vender Specific Application of USB Device Controller
• Support ATA/ATAPI Device (HDD / SSD / Blu-ray / DVD / CD)
• Support Advance Format HDD
• Support HDD FDE command
• Support Over 2TB HDD with windows VISTA and Win7
• Support Write Protect for HDD
  • Read-only (Write Protect) or Read/Write Setting Header
• LEDs:
  • Provides Power and Write Protect LEDs
  • Power Indicator LEDs Header
• Power
  • U3-SATA312-22: Self-Powered (DC Power Input: Big IDE 4-pin DC Power Connector)
  • U3-SATA312-7: Bus-Powered
• USB 3.0 Cable Ports (B Type Receptacle) with Screw Lock Holes (M2)
  USB3.0 cable lock mechanism

• U3-SATA312-7: 83.3mm x 21.56mm x 38.6mm
• U3-SATA312-22 : 83.3mm x 21.56mm x 44.1mm
• SCSI 1 50pin Low Density Centronics Connector Form Factor. (Fit to most standard SCSI enclosure)

• Desktop PC: with either a built-in USB (1.0 or 2.0 or 3.0) controller or an USB (1.0 or 2.0 or 3.0) to PCI Host Adapter equipped with an external USB port.
• Laptop PC: with either a built-in USB (1.0 or 2.0 or 3.0) controller or an USB (1.0 or 2.0 or 3.0) to CardBus PC Card equipped with an external USB port.

Kit 1:

• U3-SATA312 Bridge Board
• User's Guide

Kit 2:

• U3-SATA312 Bridge Board
• CB-00541-01 ---USB 3.0 A Plug to USB 3.0 B Plug with Jackscrews (M2) Cable L=2M
• User's Guide

Kit 3:

• U3-SATA312 Bridge Board
• CB-00537-01 ---USB 3.0 A Plug to USB 3.0 B Plug with Jackscrews (M2) on both End Cable L=2M
• User's Guide