Highlights

USB 3.1 Gen 1 (5Gbps) High-Flex A Plug to Micro-B Plug Up 90° with two Jackscrews SuperSpeed only Cable

  • The maximum cable length can be up to 20m.
  • The maximum transition speed can be up to 5Gbps.
  • Not backward compatible with USB 2.0
  • With locking screw in device side.
  • Injection plastic housing
  • High flexibility Meet Robotic level II standard
  • >50million cycle times bending test.
  • Providing maximum 900mA/5V for the device.
  • No driver.
  • Support hot-plugging.
  • Meet EMC4.0
Introduction

CB-HU302 is USB 3.0 Std-A to Micro-B Up 90° interface hybrid active optical cable (AOC). It is plastic injection housing with locking screws in device side. On the basis of use optical fiber as the transmission medium, it integrate copper to achieve the purpose of supplying power to device. The hybrid cable length can be up to 20m without adding any relay device which is suitable for the scene of having no on-site power supply. It is suitable for machine vision using. This production can meet the USB3 Vision standard. Adopting special bending-resistant fiber makes the whole cable reach high flexibility standard. Its length can reach 20 meters, which is four times that of traditional copper wire.

Technical Specifications
  • Host Side: USB 3.0 Standard-A Plug
  • Device Side: USB 3.0 Micro-B Plug(with locking screw, Up 90°)
  • Bend Radius (Dynamic/Static): 60mm/30mm
  • Tensile Strength (Long Term/Short Term): 150N/300N
  • Crush Resistance (Long Term/Short Term)/100mm: 200N/350N
  • Input Power (Host Side): 0.94W
  • Output Power (Device Side): 900mA, 600mA@20m

Part No. LENGTH OD Note
CB-HU302-050 5M 4.8mm  

CB-HU302-100

10M 4.8mm  
CB-HU302-150 15M 4.8mm  
CB-HU302-200 20M 4.8mm Remote devices need to be self-powered