WBATA525Q -R1 is a ATA to ATA RAID 1 sub-system without bridge board.
WBATA525Q -R1 is a reliable and cost effective solution for RAID 1 disk mirroring.
By mirroring technique, WBATA525Q -R1 maintains data in two disk drivers simultaneously and securely.
If one drive fails, WBATA525Q -R1 automatically switches operations to the functional drive and alarms to alert the failure.
WBATA525Q -R1 takes full advantage of high-speed Ultra DMA 133 ATA Bus allowing for multitasking performance.
You can install different bridge boards with WBATA525Q -R1 to have different I/O interface (such as USB 2.0/ FireWire (1394) / Serial ATA/ Lan). WBATA525Q -R1 allows users to easily hot-swap hard disk drive without interrupting the current operation.
WBATA525Q -R1 provides the perfect solution for data backup and transferring of data between computers using ATA/SATA HDDs.

Peripheral vendors using the WBATA525Q -R1 now have an immediate and no-risk solutions for adding USB 2.0/ FireWire (1394) / Serial ATA/ Lan
interface to their product lines.
WBATA525Q -R1 allows peripheral vendors a unique opportunity to continue to take advantage of the ATA/SATA economies of scale while
presenting RAID 1 sub-system into the rapidly expanding storage markets.
End users using the different bridge boards now have a flexible and no-risk solutions for changing the I/O interface to their computer.

WBATA525Q-R1 combines Three key components:

1). IDE-RAID-IDE Subsystem --- ATA2ATAR01
2). ATA Mobile Rack --- KTCIDEMR
3).Case and Power supply ---

1). IDE-RAID-IDE Subsystem: (ATA2ATAR01)

• Support RAID level 1 (Disk Mirror)
• Provide two IDE ports (X and Y) for ATA Mobile Rack (KTCIDEMR)
• Auto-Rebuild (70GB/ hour)
• Support up to UDMA 133/100/66/33
• OS Independence, require no device driver
• Hot-Swap Supported
• Provides One RS-232 Port for RAID Management

2). ATA Mobile Rack

• The inner HDD tray provide the screw hole for 3.5" ATA HDD.
• The inner HDD tray and mounting frame were made by aluminum which is good for heat dissipation.
• Ejecting pull handle with miniature keylock.
• keylock + Power Switch make the HDD Mobile Tray
• Hot Swaptable
• One Built-in 40x40 mm cooling fan.
• Power indicator LED and HDD Access LED

3). Case and Power supply:

• Provide Power indicator LED and Disk Status LEDs
• Provide Power Switch on the front panel
• Built-in 80W power supply/Universal auto-switching 90-240V AC
• Built-in 80x80 mm cooling fan

The following bridge boards could be installed into WBATA525Q -R1.

a. USB 2.0 to ATA bridge: U2EIDE01S - WBATA525Q -R1 + U2EIDE01S = U2ATA525Q -R1.
b. USB 2.0 & FireWire 400 (1394a) to ATA Combo bridge: U2FW-IDE02 - WBATA525Q-R1 + U2FW-IDE02 = U2FWATA525Q -R1.
c. FireWire 800 (1394b) to ATA bridge: FWB-IDE01A - WBATA525Q-R1 + FWB-IDE01A = FWB2ATA525Q -R1.
d. FireWire 800 (1394b) & USB 2.0 to ATA Combo bridge: FWBU2-IDE02 - WBATA525Q-R1 + FWBU2-IDE02 = FWBU2ATA525Q -R1.
e. Serial ATA to ATA bridge: SATA-IDE03-S1 - WBATA525Q-R1 + SATA-IDE03-S1 = SATA2ATA525Q -R1.
f. Lan & USB 2.0 to ATA bridge: LDU2-ATA01 - WBATA525Q-R1 + LDU2-ATA01 = LDU2ATA525Q -R1.