Introduction

ESFWBU2SATA525QAR6 is most cost-effective SATA II disk drive RAID subsystem with completely integrated high performance and data protection capabilities. ESFWBU2SATA525QAR6 takes full advantage of high-speed 1394/USB serial bus and Serial ATA Bus allowing for multi-user and multitasking performance. ESFWBU2SATA525QAR6 delivers the performance required for servers and I/O demanding applications such as Video-On-Demand, database servers, workstations, high-end desktops, and image systems. ESFWBU2SATA525QAR6 allows two HDD failure without impact on the existing data and failed drive rebuild is transparent to the host. Environmental information is accessible either via the control panel/serial port or Ethernet port.

Features
  • LCD Control Panel: To simplify the RAID setup and management of the associated disk drives.
  • Allows manual RAID configuration and status monitoring.
  • Uses hardware monitor to monitor system voltage, temperature and fan activity.
  • Displays warning message on LCD screen when respective disk encounters problems.
  • Support up to 5 SATA or SATA II drives.
  • Support RAID 6.
  • USB 2.0, FireWire 800 (1394b) and SATA ComBo interface.

Technical Specifications

ESFWBU2SATA525QAR6 combines three key components:

1). FWBU2DSATA01 (e-SATA, FireWire800 (IEEE 1394b) & USB 2.0 to SATA Bridge Board) + ESATA-ESC-2R
2). ARC-5030 (ATA/SATA-RAID-SATA Subsystem)
3). Case and Power supply

1). FWBU2DSATA01 (e-SATA, FireWire800 (IEEE 1394b) & USB 2.0 to SATA Bridge Board) + ESATA-ECS-2R:

  • e-SATA Port: One eSATA Signal 7pin Receptacle Connector
  • SATA Transfer Rate: 150Mbytes/s
  • FireWire Ports: Two Biligual-9pin
  • 1394 Bus Transfer Rate: 100/200/400/800 Mbps
  • USB 2.0 Port: One USB B-Type connector
  • USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
  • SATA Port: One SATA Signal 7pin Connector
  • SATA Transfer Rate: 150Mbytes/s
  • Provide pin header for Power indicator LED and SATA Access LED
  • SCSI I 50pin Low Density Centronics Connector Form Factor (Fit to most standard SCSI enclosure)
  • ESATA-ECS-2R :e-SATA 7pin receptacle to SATA 7pin plug (Reverse Type) signal extension cable L=10cm : (CB-00358) with SCSI 1 Centronics 50pin Low-Density Connector form factor bracket: BR-00184. BR-00184 was designed to hold one (CB-00358) and one RJ45 receptacle port PCBA which come with Areca ARC5030 RAID subsystem.

2). ARC-5030 (ATA/SATA-RAID-SATA II Subsystem)

  • Form Factor: 3 Consecutive 5.25" Drive Bays.
  • Provide five SATA Mobile Rack for 3.5" Serial ATA HDD.
  • Support up to UDMA 133/100/66/33 and SATA II 3.0Gbytes/s.
  • Support RAID level 0, 1, 1E, 3, 5, 6 and JBOD.
  • Online Capacity expansion, RAID level/stripe size migration.
  • Online Dynamic Volume Set Capacity expansion.
  • Support 2TB (Max.) per Volume set.
  • Hot-Swap, Hot-Spare and Auto-Rebuilding Function Support
  • Redundant Flash Image for Adapter availability.
  • Web Browser-Based RAID Manager via Archttp Proxy through RS-232 port for Windows and Linux System.
  • Firmware-embedded Web Browser-Based RAID Manager, SMTP manager, and SNMP agent via Ethernet port with no software required.
  • OS Independence, require no device driver

3). Case and Power supply:

  • Patented handle bar design for easy carrying and transportation
  • Provide four 5.25" device bay - The inner metal mounting bracket provide the screw hole for 5.25" devices
  • Power indicator LED and HDD access LED
  • Provide Power Switch on the front panel
  • Built-in 220W switching power supply/ Manual-switch input (115 or 230V AC)
  • Built-in 80x80 mm cooling fan
Physical Dimensions
  • 200 mm (W) x 292 mm (D) x 186 mm (H)
Kit includes
  • ESFWBU2SATA525QAR6 RAID Subsystem.
  • FireWire Beta -to- Beta Cable in length of 2.0m.
  • USB 2.0 A-to-B type Cable in length of 1.5m.
  • eSATA 7pin plug to eSATA 7pin plug cable in length of 1.5m.
  • AC Power Core
  • CD-title (MRAID Manager Utility and Manual)
  • User's Guide & RAID Manual