Feature
  • Aluminum Enclosure Design: good heat dissipation
  • Easy installation
  • Support two 3.5 inch SATA HDDs
  • USB 2.0 High Speed interface
  • RAID
    • Striping : for disks with same capacity.
    • Spanning : for disks with different capacity.
Introduction

U2SATA35D is an USB 2.0 to SATA external enclosure.

U2SATA35D is ideally suited for tailgate interface applications for two SATA HDDs. It allows two SATA drives to be connected to USB 2.0 serial bus in a plug-and-play fashion.

U2SATA35D provides the perfect solution for data backup and transferring of data between computers using SATA hard disk drives.
Technical Specifications
U2SATA35D combines three key components.
 1). USB 2.0 to SATA Bridge Board:
2). Aluminum made housing
3). AC to DC Power Adapter.

1). USB 2.0 to SATA Bridge Board:

  • DC Power Connector: Walkman-type 2.0 mm DC Jack
  • HDD Power Connector: Two mini 4-pin Floppy Disk Drive like power connectors
  • USB 2.0 Port: One USB B-Type connector
  • USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
  • USB Bus Power: Self Powered Mode Operation
  • SATA Port: Two SATA Signal 7pin Connectors
  • SATA Transfer Rate: 150Mbytes/s

2). Aluminum made housing:

  • Mobile rack like design
    • The housing is designed to provide sliding guide in the inner side
    • The inner metal mounting bracket provide the screw hole for two 3.5" SATA HDDs.
    • Design to install the SATA HDDs outside the housing
  • Provide Power indicator LED (Red color) on the front panel
  • Provide SATA Access indicator LED (Blue color) on the front panel
  • Power Switch on the rear panel.
  • Provide a 40mm X 40mm cooling fan on the rear panel

3). AC to DC Power Adapter:

  • Input: Changeable AC power cord
  • Auto-switching
    • Input: 100~240Vac, 50~60Hz, 1.7A (Max)
    • Output: +12Vdc, 4.16A (Max)
  • Output: Standard Walkman-type 2.1 mm DC power plug
Hardware Requirements
  • Desktop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
  • Laptop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.
Operating System Requirements
  • Windows ME/2000/XP/2003; MacOS 9.1 or higher; Linux
  • Driver Requirements
    • USB:
      • No driver installation for Windows ME, 2000, XP, 2003, Mac OS and Linux.
Certifications
  • CE Test: Pass
  • FCC Test : Pass
  • VCCI Test: Pass
  • C-TICK Test: Pass
             
Kit includes
  • U2SATA35D Enclosure.
  • USB 2.0 A-to-B type Cable (1.5m length).
  • AC 100 ~ 240 V to DC +12V/ 4.16A Power Adapter
  • AC power cord (6 feet length)
  • Screws for two 3.5" HDD
  • T-shape Screw Driver
  • User's Manual