Introduction

UF2SATA35D is an USB 2.0 & FireWire (IEEE 1394a) ComBo to SATA external enclosure.

UF2SATA35D is ideally suited for tailgate interface applications for two SATA HDDs. It allows two SATA drives to be connected to USB 2.0 or FireWire (IEEE 1394a) serial bus in a plug-and-play fashion.

UF2SATA35D provides the perfect solution for data backup and transferring of data between computers using SATA hard disk drives.
Features
  • Aluminum Enclosure Design: good heat dissipation
  • Easy installation
  • Support two 3.5 inch SATA HDDs
  • USB 2.0 & FireWire (IEEE 1394a) Combo interface
  • RAID
    • Striping : for disks with same capacity.
    • Spanning : for disks with different capacity.
Technical Specifications
UF2SATA35D combines three key components.
 1). USB 2.0 & FireWire (IEEE 1394a) to SATA Bridge Board
2). Aluminum made housing
3). AC to DC Power Adapter.

1). USB 2.0 & FireWire (IEEE 1394a) to SATA Bridge Board

  • DC Power Connector: Walkman-type 2.0 mm DC Jack
  • HDD Power Connector: Two mini 4-pin Floppy Disk Drive like power connectors
  • USB 2.0 Port: One USB B-Type connector
  • USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
  • USB Bus Power: Self Powered Mode Operation
  • FireWire Port:: Two FireWire (IEEE 1394a) 6pin Connectors
  • 1394a PHY: Ti's TSB41AB2 1394a-2000 400Mbps PHY
  • 1394 Bus Transfer Rate: 100/200/400 Mbps
  • SATA Port: Two SATA Signal 7pin Connectors
  • SATA Transfer Rate: 150Mbytes/s

2). Aluminum made housing:

  • Mobile rack like design
    • The housing is designed to provide sliding guide in the inner side
    • The inner metal mounting bracket provide the screw hole for two 3.5" SATA HDDs.
    • Design to install the SATA HDDs outside the housing
  • Provide Power indicator LED (Red color) on the front panel
  • Provide SATA Access indicator LED (Blue color) on the front panel
  • Power Switch on the rear panel.
  • Provide a 40mm X 40mm cooling fan on the rear panel

3). AC to DC Power Adapter:

  • Input: Changeable AC power cord
  • Auto-switching
    • Input: 100~240Vac, 50~60Hz, 1.7A (Max)
    • Output: +12Vdc, 4.16A (Max)
  • Output: Standard Walkman-type 2.1 mm DC power plug
Hardware Requirements
  • Desktop PC: with either a built-in FireWire (IEEE 1394a) controller or a FireWire (IEEE 1394a) to PCI Host Adapter equipped with a external FireWire (IEEE 1394a) port.
  • Desktop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
  • Laptop PC: with either a built-in FireWire (IEEE-1394a) controller or a FireWire (IEEE-1394a) to CardBus PC Card equipped with a external FireWire (IEEE 1394a) port.
  • Laptop PC: with either a built-in USB (1.0 or 2.0) controller or an USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.
Operating System Requirements
  • Windows ME/2000/XP/2003/Vista/7; MacOS 9.1 or higher; Linux
  • Driver Requirements
    • USB:
      • No driver installation for Windows ME, 2000, XP, 2003, Vista, 7Mac OS and Linux.
    • FireWire:
      • No driver installation for Windows ME, 2000, XP, 2003, Vista, 7, Mac OS and Linux
Certifications
  • CE Test: Pass
  • FCC Test : Pass
  • VCCI Test: Pass
  • C-TICK Test: Pass
             
Kit includes
  • UF2SATA35D Enclosure.
  • FireWire 6pin-to-6pin Cable (1.5m length)
  • USB 2.0 A-to-B type Cable (1.5m length)
  • AC 100 ~ 240 V to DC +12V/ 4.16A Power Adapter
  • AC power cord (6 feet length)
  • Screws for two 3.5" HDD
  • T-shape Screw Driver
  • User's Manual