FWBU2EIDE35-1 is an USB 2.0 & FireWire 800 (1394b) ComBo to ATA external
enclosure designed to enable hot-swap, plug-and-play operation for 3.5 inch ATA
HDD through the USB 2.0 or FireWire 800 (1394b) connection interface
installed on a computer. FWBU2EIDE35-1 allows users to easily hot-swap ATA hard disk drive without interrupting an concurring operation.

FWBU2EIDE35-1 provides the perfect solution for data backup and transfering of data between computers using hard disk drives.

• Aluminum Enclosure Design: good heat dissipation
• Easy installation
• Support standard 3.5 inch HDD
• FireWire 800 (1394b) or USB 2.0 combo interface
• Provide 3 kinds of Foot Stand (Transparency, Blue and Pink)
• Provide 3 kinds of Front Panel (Transparency, Blue and Pink)
• Provide coil cable lock (3-Digits Number) for Security

FWBU2EIDE35-1 combines three key components:
1). USB 2.0 & FireWire 800 (1394b) to ATA Bridge Board:
2). Mechanism
3). AC 100 ~ 240 V to DC +12V 3A Power Adapter.

1). USB 2.0 & FireWire 800 (1394b) to ATA Bridge Board:

• DC Power Connector: Walkman-type 2.0 mm DC Jack
• USB 2.0 and FireWire 800 (1394b) arbitration: Auto-Switch by detecting USB bus power.
• ATA Interface: Male IDC 2X20 Connector
• USB 2.0 Interface: One mini B-5pin USB connector
• USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
• USB Bus Power: Self Powered Mode Operation
• Number of 1394b ports: External X 2 (Bilingual-9pin)
• 1394b PHY: Ti TSB81BA3
• 1394 Bus Transfer Rate: 100/200/400/800 Mbps
• Complies with T13's ATA/ATAPI-6 Draft Specification:
  • PIO Mode 0 ~ 4
  • DMA Mode 0 ~ 2
  • Ultra DMA Mode 0 ~ 6
• Supports 48-bit LBA for large hard drives (>128GB).

2). Mechanism:

• Aluminum made housing
• Mobile rack like design
  • The housing is designed to provide sliding guide in the inner side
  • The inner metal mounting bracket provide the screw hole for 3.5" ATA HDD.
  • Design to install the ATA HDD outside the housing
• Changeable Front Panel
  • Provide 3 color (Transparency, Blue and Pink color) Front Panel
• Provide Foot Stand to hold U2FWEIDE35-3 stand still
  • Provide 3 color (Transparency, Blue and Pink color) Foot Stand
• Provide Lock Ring for coil cable lock
• Provide Power indicator LED (Red color) on the front panel
• Provide ATA Access indicator LED (Blue color) on the front panel
• Power Switch on the rear panel.

• Desktop PC (1): with either a built-in FireWire (1394b or 1394a) controller or a FireWire (1394b or 1394a) to PCI Host Adapter equipped with a external FireWire (1394b or 1394a) port.
• Desktop PC (2): with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
• Laptop PC: with either a built-in FireWire (1394b or 1394a) controller or a FireWire (1394b or 1394a) to CardBus PC Card equipped with a external FireWire (1394b or 1394a) port.
• Laptop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.

• Windows 98SE/ME/2000/XP/7; MacOS 9.1 or higher

• FWBU2EIDE35-1 Enclosure
• Bilingual 9pin -to- 9pin Cable (1.0m length)
• Bilingual 9pin -to- FireWire 6pin Cable (1.0m length)
• USB 2.0 A -to- Mini B 5pin Cable (1.0m length)
• AC 100 ~ 240 V to DC +12V 3A Power Adapter
• Screws for 3.5" HDD
• T-shape Screw Driver
• 3 color (Transparency, Blue and Pink color) Front Panel
• 3 color (Transparency, Blue and Pink color) Foot Stand
• Coiling Cable Lock (3-Digits Number)
• CD-title (Win98 Drivers and Installation Guide)
• User's Manual
• Protection Bag