FWBU2ATA35-2 is a FireWire 800 (1394b) & USB 2.0 ComBo to ATA external enclosure designed to enable hot-swap, plug-and-play operation for 3.5 inch ATA HDD through the connection to USB 2.0 or FireWire 800 (1394b) interface installed on a computer. FWBU2ATA35-2 allows users to easily hot-swap ATA hard disk drive without interrupting the current operation. FWBU2ATA35-2 provides the perfect solution for data backup and transferring of data between computers using hard disk drives.

• Aluminum Enclosure Design: good heat dissipation
• Easy installation
• Support standard 3.5 inch HDD
• FireWire 800 (1394b) or USB 2.0 ComBo interface
• Provide 3 kinds of Foot Stand (Transparency, Blue and Pink)
• Provide 3 kinds of Front Panel (Transparency, Blue and Pink)
• Provide coil cable lock (3-Digits Number) for Security

FWBU2ATA35-2 combines three key components.
1). FireWire 800 (1394b) & USB 2.0 ComBo to ATA Bridge Board
2). Mechanism
3). AC 100 ~ 240 V to DC +12V 4.16A Power Adapter

1). FireWire 800 (1394b) & USB 2.0 ComBo to ATA Bridge Board:

• DC Power Connector: Walkman-type 2.0 mm DC Jack
• USB 2.0 and FireWire 800 (1394b) arbitration: Auto-Switch by detecting USB bus power.
• USB 2.0 Interface: One mini B-5pin USB connector
• USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
• USB Bus Power: Self Powered Mode Operation
• Number of 1394b ports: External X 2 (Bilingual-9pin)
• 1394b PHY: Ti TSB81BA3
• 1394 Bus Transfer Rate: 100/200/400/800 Mbps
• ATA Interface: Female IDC 2X20 Connector
• Complies with T13's ATA/ATAPI-7 Draft Specification:
  • PIO Mode 0 ~ 4
  • DMA Mode 0 ~ 2
  • Ultra DMA Mode 0 ~ 6
• Supports 48-bit LBA for large hard drives (>128GB).

2). Mechanism:

• Aluminum made housing
• Mobile rack like design
  • The housing is designed to provide sliding guide in the inner side
  • The inner metal mounting bracket provide the screw hole for 3.5" ATA HDD.
  • Design to install the ATA HDD outside the housing
• Changeable Front Panel
  • Provide 3 color (Transparency, Blue and Pink color) Front Panel
• Provide Foot Stand to hold U2FWEIDE35-3 stand still
  • Provide 3 color (Transparency, Blue and Pink color) Foot Stand
• Provide Lock Ring for coil cable lock
• Provide Power indicator LED (Red color) on the front panel
• Provide ATA Access indicator LED (Blue color) on the front panel
• Power Switch on the rear panel

• Desktop PC: with either a built-in FireWire (1394b or 1394a) controller or a FireWire (1394b or 1394a) to PCI Host Adapter equipped with a external FireWire (1394b or 1394a) port.
• Desktop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
• Laptop PC: with either a built-in FireWire (1394b or 1394a) controller or a FireWire (1394b or 1394a) to CardBus PC Card equipped with a external FireWire (1394b or 1394a) port.
• Laptop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.

• Windows 98 SE /ME/2000/XP; Mac OS 9.1 or higher
• Driver Requirements
  • USB:
    • No driver installation for Windows ME, 2000, XP and Mac OS
    • Driver available for Window 98 SE
  • FireWire:
    • No driver installation for Windows 98SE, ME, 2000, XP and Mac OS

• FWBU2ATA35-2 enclosure.
• Beta 9pin-to-Beta 9pin cable (1.0m length)
• USB 2.0 A-to-Mini B 5pin cable (1.0m length)
• AC 100 ~ 240 V to DC +12V 4.16A power adapter
• Screws for 3.5" HDD
• T-shape screw driver
• 3 color (Transparency, Blue and Pink color) front panel
• 3 color (Transparency, Blue and Pink color) foot stand
• CD-title (Win98 Drivers and Installation Guide)
• User's manual
• Protection bag