Introduction
U2SATAMR01-A1 is an USB 2.0 to Serial ATA Mobile Rack 5.25" bay enclosure with external 36W (12V/3A) power supply.

U2SATAMR01-A1 is ideally suited for tailgate interface applications for 3.5" Serial ATA hard disk drive.

It allows Serial ATA HDD to be connected to USB 2.0 serial bus in a plug-and-play fashion.

U2SATAMR01-A1 allows users to easily hot-swap Serial ATA HDD without interrupting the current operation.

U2SATAMR01-A1 provides the perfect solution for data backup and transferring of data between computers using 3.5" Serial ATA HDDs.
Technical Specifications
U2SATAMR01-A1 combines four key components.
 1). USB 2.0 to Serial ATA Bridge Board
2). Plastic Bondi and Foot Stand
3). SATA Mobile Rack
4). AC -to- DC Power Adapter

1). USB 2.0 to Serial ATA Bridge Board:

  • USB 2.0 Interface: One USB B-Type connector
  • USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
  • USB Bus Power: Self Powered Mode Operation
  • Complies with Gen1i and Gen1m of Serial ATA II Electronical Specification 1.0
  • Serial ATA Bus Transfer Rate: 1.5 Gbps
  • Serial ATA port: One Signal Plug Type (7pin) Connectors
  • Support hot-plug & hot-swap feature of Serial ATA to USB.
  • Power indicator LED and ATA/SATA Access LED
  • DC Power Connector: Walkman-type 2.0 mm DC Jack

2). Plastic Bondi and Foot Stand Holder

  • Universal Outer Plastic Bondi
  • Top and Bottom are the same
  • Provide one standard 5.25" device bay
  • Easy of assembly and disassembly
  • Provide Universal Foot Stand Holder (4pcs) with colorful foot pad
  • To bind the Top and Bottom Plastic Bondi closely
  • Let U2SATAMR01-A1 can stand either horizontally or vertically.
  • Design for stacking up two U2SATAMR01-A1

3). Serial ATA Mobile Rack

  • Fits the Dimension of 5.25"Device Bay Used on Computer Case or RAID Subsystems.
  • Designed with Sealed-off Metal Enclosure - provides good shielding for EMI prevention.
  • EMI Gasket Designed for Grounding HDD Mobile Tray.
  • Connects SATA Hard Disk Drive Directly to Serial ATA Cable.
  • No extra converting P.C.B required .
  • Key Lock (with power switch control)
  • Lock and unlock the HDD mobile tray
  • Make Serial ATA HDD be able to hot-plug and hot-swap
  • Power indicator LED & HDD Access LED are provided
  • Built-in 40x40 mm cooling fan

4). AC -to- DC Power Adapter

  • Input: Changeable AC power cord.
  • Auto-switching 100 ~ 240VAC to +12VDC/3A Power Adapter.
  • Input: 100 ~ 240VAC, 50 ~ 60HZ, 1.2A (Max)
  • Output: +12VDC, 3A (Max)
  • Output: Standard Walkman-type 2.1 mm DC power plug.
Hardware Requirements
  • Desktop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
  • Laptop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.
Computer Platform
  • Windows and Mac
Operating System Support
  • Windows 98SE/ME/2000/XP; MacOS 9.1 or higher
Kit includes
  • U2SATAMR01-A1 Enclosure.
  • A-to-B type USB 2.0 Cable 1.0m length.
  • AC 100 ~ 240 V to DC +12V/3A Power Adapter.
  • AC power cord 6 feet length.
  • Screws for 3.5" HDD.
  • Two Keys.
  • Installation Guide.