U2ATA525MR01 is an USB 2.0 to ATA 5.25" bay enclosure with Mobile Rack.

U2ATA525MR01 is ideally suited for tailgate interface applications for 3.5" ATA/ Serial ATA hard disk drive.

It allows ATA/Serial ATA HDD to be connected to USB 2.0 serial bus in a plug-and-play fashion.

U2ATA525MR01 allows users to easily hot-swap Serial ATA HDD without interrupting the current operation.

U2ATA525MR01 provides the perfect solution for data backup and transferring of data between computers using 3.5" ATA/Serial ATA HDDs.

U2ATA525MR01 combines Three key components.
1). USB 2.0 to ATA Bridge Board
2). Case and Power Supply
3). IOIIDEMR-05 ATA Mobile Rack

1). USB 2.0 to ATA Bridge Board:

• USB 2.0 Interface: One USB B-Type connector
• USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
• USB-IF Integrators List (Test ID Number:10001288)
• USB Bus Power: Self Powered Mode Operation
• IDE (ATA/ATAPI) Interface: Male IDC 2X20 Connector
• USB 2.0 to ATA Native Bridge Controller: Ali M5621
• Complies with T13's ATA/ATAPI-6 Draft Specification:
  • PIO Mode 0 ~ 4
  • Multiword DMA Mode 0 ~ 2
  • Ultra DMA Mode 0 ~ 4
• Supports 48-bit addressing for large hard drives (>128GB).
• Power High Speed indicator LED and HDD Access LED
• DC Power Connector: Walkman-type 2.0 mm DC Jack

2). Case and Power Supply:

• Provide one standard 5.25" device bay
• Easy of assembly and disassembly
• Provide colorful foot pad (8pcs), let U2ATA525MR01 can stand either horizontally or vertically.
• Design for stacking up two or more U2ATA525MR01
• Built-in 50W power supply/Universal auto-switching 90-240V AC
• Built-in 40x40 mm cooling fan
• Power Switch and Power LED on the front panel

3). IOIIDEMR-05 ATA Mobile Rack:

• Fits the Dimension of 5.25"Device Bay Used on Computer Case or RAID Subsystems.
• The inner HDD tray provide the screw hole for 3.5" SATA/ATA HDD.
• The inner HDD tray and mounting frame were made by aluminum which is good for heat dissipation.
• Ejecting pull handle with miniature keylock.
• Keylock (with power switch control)
• Lock and unlock the HDD mobile tray
• Make HDD mobile tray hot-swapable
• Power indicator LED & HDD Access LED are provided
• Built-in 40x40 mm cooling fan
• Provide three kinds of HDD Mobile Tray:
  • 3.5" ATA HDD Mobile Tray (default)
  • 2.5" ATA HDD Mobile Tray
  • 3.5" Serial ATA HDD Mobile Tray

For 2.5"ATA HDD	For 3.5"ATA HDD	For 3.5"SATA HDD

 

Notes:

• EC-300008 (beige color) Mobile Tray is for 3.5" ATA HDD
• EC-300010 (black color) Mobile Tray is for 3.5" ATA HDD
• IDE-SATAMT01a (beige color) Mobile Tray is for 3.5" Serial ATA HDD
• IDE-SATAMT01b (black color) Mobile Tray is for 3.5" Serial ATA HDD
• 35-25MT01a (beige color) Mobile Tray is for 2.5" ATA HDD
• 35-25MT01b (black color) Mobile Tray is for 2.5" ATA HDD

• Desktop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to PCI Host Adapter equipped with a external USB port.
• Laptop PC: with either a built-in USB (1.0 or 2.0) controller or a USB (1.0 or 2.0) to CardBus PC Card equipped with a external USB port.

• Windows 98SE/ME/2000/XP/2003; MacOS 9.1 or higher; Linux
• Driver Requirements
  • No driver installation for Windows ME, 2000, XP, 2003, Linux and Mac OS
  • Driver available for Window 98 SE

• U2ATA525MR01 Enclosure.
• A-to-B type USB 2.0 Cable 1.0m length.
• AC power cord 6 feet length.
• Screws for 3.5" HDD.
• Two Keys.
• Installation Guide.