U2ATA525MR02 combines Three key components.
1). USB 2.0 to ATA Bridge Board
2). Case and Power Supply
3). IOIIDEMR-05 ATA Mobile Rack
1). USB 2.0 to ATA Bridge Board:
- USB 2.0 Interface: One USB B-Type connector
- USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
- USB-IF Certified Compliant for USB 2.0 (Test ID Number: 40490119)
- USB Bus Power: Self Powered Mode Operation
- IDE (ATA/ATAPI) Interface: Male IDC 2X20 Connector
- USB 2.0 to ATA Native Bridge Controller: Cypress CY7C68300C
- Complies with T13's ATA/ATAPI-6 Draft Specification:
- PIO Mode 0, 3, 4
- Multiword DMA Mode 2
- Ultra DMA Mode 2, 3, 4
- Supports 48-bit addressing for large hard drives (>128GB).
- Power High Speed indicator LED and HDD Access LED
- DC Power Connector: Walkman-type 2.0 mm DC Jack
2). Case and Power Supply:
- Provide one standard 5.25" device bay
- Easy of assembly and disassembly
- Provide colorful foot pad (8pcs), let U2ATA525MR02 can stand either
horizontally or vertically.
- Design for stacking up two or more U2ATA525MR02
- Built-in 50W power supply/Universal auto-switching 90-240V AC
- Built-in 40x40 mm cooling fan
- Power Switch and Power LED on the front panel
3). IOIIDEMR-05 ATA Mobile Rack:
- Fits the Dimension of 5.25"Device Bay Used on Computer Case or
RAID Subsystems.
- The inner HDD tray provide the screw hole for 3.5" SATA/ATA
HDD.
- The inner HDD tray and mounting frame were made by aluminum which
is good for heat dissipation.
- Ejecting pull handle with miniature keylock.
- Keylock (with power switch control)
- Lock and unlock the HDD mobile tray
- Make HDD mobile tray hot-swapable
- Power indicator LED & HDD Access LED are provided
- Built-in 40x40 mm cooling fan
- Provide three kinds of HDD Mobile Tray:
- 3.5" ATA HDD Mobile Tray (default)
- 2.5" ATA HDD Mobile Tray
- 3.5"/2.5" Serial ATA HDD Mobile Tray
Notes:
- EC-300008 (beige color) Mobile Tray is for 3.5" ATA HDD
- EC-300010 (black color) Mobile Tray is for 3.5" ATA HDD
- IDE-SATAMT01a (beige color) Mobile Tray is for 3.5" Serial
ATA HDD
- IDE-SATAMT01b (black color) Mobile Tray is for 3.5" Serial
ATA HDD
- 35-25MT01a (beige color) Mobile Tray is for 2.5" ATA HDD
- 35-25MT01b (black color) Mobile Tray is for 2.5" ATA HDD
|