Introduction

UFS525QAR6 is most cost-effective SATA II disk drive RAID subsystem with completely integrated high performance and data protection capabilities. UFS525QAR6 takes full advantage of high-speed 1394/USB serial bus and Serial ATA Bus allowing for multi-user and multitasking performance. UFS525QAR6 delivers the performance required for servers and I/O demanding applications such as Video-On-Demand, database servers, workstations, high-end desktops, and image systems. UFS525QAR6 allows two HDD failure without impact on the existing data and failed drive rebuild is transparent to the host. Environmental information is accessible either via the control panel/serial port or Ethernet port.

Features
  • LCD Control Panel: To simplify the RAID setup and management of the associated disk drives.
  • Allows manual RAID configuration and status monitoring.
  • Uses hardware monitor to monitor system voltage, temperature and fan activity.
  • Displays warning message on LCD screen when respective disk encounters problems.
  • Support up to 5 SATA or SATA II drives.
  • Support RAID 6.
  • USB 2.0, FireWire 800 (1394b) and eSATA ComBo interface.

Technical Specifications

UFS525QAR6 combines three key components:
1). FWBU2DSATA14(e-SATA, FireWire800 (IEEE 1394b) & USB 2.0 to SATA Bridge Board)
2). ARC-5030-R (ATA/SATA-RAID-SATA Subsystem)
3). Case and Power supply

  • 1). FWBU2DSATA14 (e-SATA, FireWire800 (IEEE 1394b) & USB 2.0 to SATA Bridge Board) :
    • DC Power Connector: Mini 4-pin Floppy Disk Drive like power connector.
    • USB 2.0 Port: One USB B-Type connector
    • USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
    • USB Bus Power: Self Powered Mode Operation
    • FireWire Port: Two Bilingual (IEEE 1394b) Connectors
    • 1394b PHY: Ti's TSB81BA3D
    • 1394 Bus Transfer Rate: 100/200/400/800 Mbps
    • eSATA port: One eSATA Singal 7pin Connector
    • SATA Transfer Rate: 300Mbytes/s
    • SATA Drive Port: One SATA Signal 7pin Latch Type Connector
    • Supports storage with more than 2 TB per Volume
    • Provide pin header for Power indicator LED and SATA Access LED
    • SCSI I 50pin Low Density Centronics Connector Form Factor (Fit to most standard SCSI enclosure)
  • 2). ARC-5030-R (ATA/SATA-RAID-SATA II Subsystem)
    • Form Factor: 3 Consecutive 5.25" Drive Bays.
    • Provide five SATA Mobile Rack for 3.5" Serial ATA HDD.
    • Support up to UDMA 133/100/66/33 and SATA II 3.0Gbytes/s.
    • Support RAID level 0, 1, 1E, 3, 5, 6 and JBOD.
    • Online Capacity expansion, RAID level/stripe size migration.
    • Online Dynamic Volume Set Capacity expansion.
    • Support 2TB (Max.) per Volume set.
    • Hot-Swap, Hot-Spare and Auto-Rebuilding Function Support
    • Redundant Flash Image for Adapter availability.
    • Web Browser-Based RAID Manager via Archttp Proxy through RS-232 port for Windows and Linux System.
    • Firmware-embedded Web Browser-Based RAID Manager, SMTP manager, and SNMP agent via Ethernet port with no software required.
    • OS Independence, require no device driver
  • 3). Case and Power supply:
    • Patented handle bar design for easy carrying and transportation
    • Provide four 5.25" device bay - The inner metal mounting bracket provide the screw hole for 5.25" devices
    • Power indicator LED and HDD access LED
    • Provide Power Switch on the front panel
    • Built-in 220W switching power supply/ Manual-switch input (115 or 230V AC)
    • Built-in 80x80 mm cooling fan
Physical Dimensions
  • 210 mm (W) x 312 mm (D) x 240 mm (H)
Kit includes
  • UFS525QAR6 RAID Subsystem.
  • FireWire Beta -to- Beta Cable in length of 2.0m.
  • USB 2.0 A-to-B type Cable in length of 1.5m.
  • eSATA 7pin plug to eSATA 7pin plug cable in length of 1.5m.
  • AC Power Core
  • CD-title (MRAID Manager Utility and Manual)
  • User's Guide & RAID Manual