Highlights
  • 1U 19-inch rack mount chassis
  • Provides four hot-swappable mobile trays for 3.5" SATA HDDs
  • Provides status (Link&Activity, Error) LEDs for each SATA HDD
  • Built-in 220W AC (115-230 VAC/50-60Hz)  to DC Switching Power Supply
  • Supports USB Super-Speed/High-Speed/Full-Speed and eSATA 3Gb/s
  • Supports RAID levels: 0 / 1 / 3 / 5 / 10 / JBOD / Clone
  • Provides RAID Manager GUI Utility to configure and monitor the status of the disks connected on RAID controller
  • Supports Hot Spare on RAID
  • Supports more than 2TB RAID drive
  • Supports on-line Auto-Rebuild
  • Rebuild speed: 200GB/hour
Introduction

1UR54-ESU301 is a USB 3.0 & eSATA to Quad SATA RAID Storage Enclosure.
It provides four hot-swappable 3.5" HDD mobile trays for easy installation and un-installation.
It is USB 3.0 & eSATA combo interface to quad-SATA bridge device with integrated hardware RAID controller, which supports a range of RAID levels and storage applications targeted at users requiring maximum performance, reliability and ease of use.
It provides the perfect solution for data backup and transferring of data between computers using either USB 3.0 or eSATA host ports.
The RAID 5 storage policy allows one HDD failure without impact on the existing data and failed drive rebuild is transparent to the host.
Technical Specifications
I/O Interface
  • eSATA Connector
    • Supports 3.0Gbps SATA II interface
    • Supports SATA II Gen2i and Gen2m (External SATA Connection, eSATA)
  • USB 3.0
    • Complies with USB 3.0 Specification, USB Mass Storage Class, Bulk-Only Transport Specification
    • Supports USB Super-Speed/High-Speed/Full-Speed Operation
    • Supports USB HID operation
    • Supports USB2.0/USB3.0 power saving mode
    • Supports external SPI NVRAM for Vendor VID/PID of USB2.0/USB3.0 device controller
    • Provides backup button
Features

Provides 7 configuration modes for storage policy

  • RAID levels: 0 / 1 / 3 / 5 / 10 / JBOD / CLONE
  • RAID 3 / 5 write-back cache to enhance performance
  • Supports more than 2TB RAID drive
  • Supports Hot Spare on RAID
Max. HDD Bay / Type Four 3.5" SATA HDDs
Form Factor 1U 19-inch rackmount chassis
Front Panel Four 3.5” SATA Mobile Racks with HDD Status LEDs
Cooling fan Two 40mm X 40mm cooling fans on the rear panel
Power
  • Power Supply: 220W
  • Input: AC 115-230V, 50-60Hz
  • Output: 12V/16A & 5V/13A (Max.)
Environmental
Condition		 Operating Temperature: 10℃-40℃ (50℉-104℉)
Relative Humidity: 10%-85% Non-condensing
Dimensions 443(W) x 43.5(H) x 404(D)mm
Weight 6.0kg (without HDD)
Kit Includes
  • 1UR54-ESU301 eSATA & USB 3.0 to Quad SATA Enclosure
  • CB-00307---e-SATA 7pin to e-SATA 7pin Cable in length of 1.5m
  • CB-00491-04---USB 3.0 A to B Type Cable in length of 1.5m
  • Sixteen SC-00040---Screws for four HDDs
  • PK-MA192 --- Installation Guide
  • CD-00036 --- CD-title (HW RAID Manager GUI AP, Backup software & TurboHDD USB software)
  • AC power cord 6 feet length (option)
    • North America Plug (NEMA 5-15) --- CB-00260
    • Europe Plug (CEE 7-VII Schuko) --- CB-00264
    • British Standard Plug (BS 1363) --- CB-00103
    • Australia Plug (AS3112) --- CB-00272