Highlights
  • 1U 19-inch rack mount chassis
  • Provides four hot-swappable mobile trays for 3.5" SATA HDDs
  • Provides status (Link&Activity, Error) LEDs for each SATA HDD
  • Built-in 220W AC (115-230 VAC/50-60Hz)  to DC Switching Power Supply
  • Supports eSATA, USB 2.0 & FireWire 800 combo Interfaces
  • Supports RAID levels: 0 / 1 / 3 / 5 / 10 / JBOD / Clone
  • Provides RAID Manager GUI Utility to configure and monitor the status of the disks connected on RAID controller
  • Supports Hot Spare on RAID
  • Supports more than 2TB RAID drive
  • Supports on-line Auto-Rebuild
  • Rebuild speed: 200GB/hour
Introduction

1UR54-ESU2F01 is a eSATA, USB 2.0 & FireWire 800 to Quad SATA RAID Storage Enclosure.
It provides four hot-swappable 3.5" HDD mobile trays for easy installation and un-installation.
It is eSATA, USB 2.0 & FireWire 800 combo interface to quad-SATA bridge device with integrated hardware RAID controller, which supports a range of RAID levels and storage applications targeted at users requiring maximum performance, reliability and ease of use.
It provides the perfect solution for data backup and transferring of data between computers using either eSATA, USB 2.0 or FireWire 800 host ports.
The RAID 5 storage policy allows one HDD failure without impact on the existing data and failed drive rebuild is transparent to the host.
Technical Specifications
I/O Interface
  • eSATA Connector
    • Supports 3.0Gbps SATA II interface
    • Supports SATA II Gen2i and Gen2m (External SATA Connection, eSATA)
  • USB 2.0:
    • USB B-Type connector
    • USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
    • USB Bus Power: Self Powered Mode Operation
  • FireWire:
    • Two Bilingual (IEEE 1394b) Connectors
    • 1394b PHY: Ti TSB81BA3
    • 1394 Bus Transfer Rate: 100/200/400/800 Mbps
Features

Provides 7 configuration modes for storage policy

  • RAID levels: 0 / 1 / 3 / 5 / 10 / JBOD / CLONE
  • RAID 3 / 5 write-back cache to enhance performance
  • Supports more than 2TB RAID drive
  • Supports Hot Spare on RAID
Max. HDD Bay / Type Four 3.5" SATA HDDs
Form Factor 1U 19-inch rackmount chassis
Front Panel Four 3.5” SATA Mobile Racks with HDD Status LEDs
Cooling fan Two 40mm X 40mm cooling fans on the rear panel
Power
  • Power Supply: 220W
  • Input: AC 115-230V, 50-60Hz
  • Output: 12V/16A & 5V/13A (Max.)
Environmental
Condition		 Operating Temperature: 10℃-40℃ (50℉-104℉)
Relative Humidity: 10%-85% Non-condensing
Dimensions 443(W) x 43.5(H) x 404(D)mm
Weight 6.0kg (without HDD)
Kit Includes
  • 1UR54-ESU2F01 eSATA, USB 2.0 & FireWire 800 to Quad SATA Enclosure
  • CB-00307---e-SATA 7pin to e-SATA 7pin Cable in length of 1.5m
  • CB-00136---USB 2.0 A to B Type Cable in length of 1.5m
  • CB-00362----Beta 9pin -to- Beta 9pin Cable in length of 2m
  • Sixteen SC-00040---Screws for four HDDs
  • PK-MA195 --- Installation Guide
  • CD-00036 --- CD-title (HW RAID Manager )
  • AC power cord 6 feet length (option)
    • North America Plug (NEMA 5-15) --- CB-00260
    • Europe Plug (CEE 7-VII Schuko) --- CB-00264
    • British Standard Plug (BS 1363) --- CB-00103
    • Australia Plug (AS3112) --- CB-00272