Introduction

The DH-2CR43R-X complies RoHS standerd and is applied an integrated single chip into memory card reader.

The controller Neodio specially designed for desktop PC, notebook, hand-held and other PC peripheral devices, which require fewer components for small PCB area. It supports a widely used flash memory card such as CF, MD, SMC, xD Picture Card, MS, MS Pro, MS Duo, MS MG Pro, MS MG Duo, MS MG Pro Duo, Mimi SD, T Flash and MMC,MMC Plus, MMC Mobile. It can be used as removable storage disks in enormous data exchange applications between PC and PC or PC and various consumer electronic appliances.

The DH-2CR43R-X reads digital content saved on memory card that user captured with the portable device such as notebook, digital camera, MP3 player, PDA and mobile phoneK etc. In addition, DH-2CR43R-X allows user to transfer information such as data, graphics, texts or digital images from one electronic device to another quickly and easily. Furthermore, DH-2CR43R-X integrates power switch function; manufacturers can use fewer components in their product design.

With DH-2CR43R-X, user's experience will be also further enhanced by the Plug-and-Play nature built into latest operation systems such as Windows 2000/XP and Mac OS X.

Technical Specifications
  • Complies with 480Mbps Universal Serial Bus specification Ver. 2.0
  • Complies with USB Storage Class specification Ver.1.0(Bulk only protocol).
  • Support Plug & Play and Hot-Swap.
  • Support slot-to-slot read/write operation.
  • Support auto-detecting slot with card inserted.
  • High efficiency Card interface hardware engine for data transfer.
  • Support
    • CompactFlash Card type I
    • CompactFlash Card type II
    • IBM Microdrive
    • SmartMedia Card (3.3V)
    • SecureDigital Card
    • MultiMedia Card
    • Sony Memory Stick
    • Memory Stick Duo
    • Memory Stick Pro
    • Memory Stick ROM
    • Memory Stick Pro Duo
    • XD card

  • Yellow access control LED (light only at access) and green power LED (Power LED must light only with running PC)
  • Access LED must light only at access event
  • EMC conformity (EN 55022, EN 55024)
  • Support PC boot function from memory card
  • Power supply from USB connector
  • USB 2.0 IF Certified
  • USB cable length 65 cm for internal connection on mainboard with a plug according Intel Standard (9pin + 1 Key pin), Pin 1, 3, 5, 7 occupied as default, (do not use pin 10 as shield); pin 9 of the plug must be blocked (code pin), a special plug with pin assignment according INTEL Standard + two additional pins.
Net Weight
  • 282.1g
Operating System Requirements
  • Support Windows 98SE/ ME/ 2000/ XP/ Mac OS 10.2 above.
Certifications
  • USB IF Test: Pass
  •