PCI Express: |
- Fully compliant with revision 1.1 base specification.
- One virtual channel.
- Eight traffic classes.
- 64-bit and 32-bit platform support.
- PCI compatible Interrupts via legacy INTx emulation
|
OHCI (Open Host Controller Interface): |
- Enhanced with the OHCI 1.2 draft specification for 1394b-2002 PHY full
operational compliance.
- OHCI 1.0 backwards compatible. Configurable via EEPROM to operate in either OHCI 1.0 or OHCI 1.1 mode.
- 8 Kbyte isochronous transmit FIFO.
- 4 Kbyte asynchronous transmit FIFO.
- 8 Kbyte isochronous receive FIFO.
- 8 Kbyte asynchronous receive FIFO.
- Dedicated asynchronous and isochronous descriptorbased DMA engines.
- Eight isochronous transmit contexts.
- Eight isochronous receive contexts.
- Supports parallel processing of incoming physical read and write requests.
|
1394b-2002 PHY: |
- Provides three IEEE 1394b-2002 compliant ports supporting 1394b-2002 speeds of 800 Mbits/s and 400 Mbits/s while main- taining backward compatibility to IEEE 1394a-2000 speeds of 100 Mbits/s, 200 Mbits/s, and 400 Mbits/s over 4.5 m copper.
- Fully supports provisions of IEEE 1394a- 2000 and 1394-1995 standards for high- performance serial bus.
- Link is not required for hub operation.
- Supports extended BIAS_HANDSHAKE time for enhanced interoperability with cam- corders.
- Does not require external filter capacitor
for PLL.
- Supports arbitrated short bus reset to improve utilization of the bus.
- Supports ack-accelerated arbitration and fly-by concatenation.
- Supports PHY pinging and remote PHY access packets.
- Fully supports suspend/resume.
|
FireWire P1394b Cable Ports: |
FWBX2-PCIE1XE220-2: Two FireWire P1394b Cable Ports
- OHCI 1: One 1394b Bilingual Ports
- OHCI 2: One 1394b Bilingual Ports
|
Power Management: |
- Supports PCI Power Management Interface specification (PCI-PM 1.2)
- Supports Advanced Configuration and Power Interface Specification, Revision 2.0 (ACPI) supporting active link state.
|
Bus Power Connector: |
with IDE big 4-pin DC +12V power connector
|