| PCI Express |
- PCI Express 4-lane Gen 3 (8.0GT/s)
- Compliant with PCI Express Base Specification Revision 3.1
- Compliant with PCI Express CEM Specification Revision 3.0
- Compliant with Advanced Configuration Power Interface (ACPI) Specification
- Support up to 512-Byte Max Payload Size
|
| USB Features |
- One Channel support two ports of USB 3.1
- Up to USB 3.1 Gen 2 10Gbps
- Compliant with Universal Serial Bus 3.1 Specification Revision 1.0
- Compliant with Universal Serial Bus Specification Revision 2.0
- Compliant with USB Attached SCSI Protocol Revision 1.0
- Support Multiple INs function
- Support USB 3.1 and USB 2.0 Link Power Management
- Support Control, Bulk, Stream, Interrupt, Isochronous transfer type
- Support independent port power control
- Support overcurrent detection
- Integrate Spread Spectrum Controller for USB 3.1 interface
- Backward compatible with Legacy USB function and device
- Support the Debugport
|
| USB Data Transfer Rate |
- USB 3.1 Gen 2 (10G), USB 3.1 Gen 1 (5G), USB 2.0 (480MB)
|
| Number of Ports |
- Four independent USB 3 Cable Ports (Std-A Receptacle, USB IF TID 360000145)
- The Vbus of each USB Port has a 2.0A Single Channel Current-Limited Power Switch for protection (IC-S0372H-03)
- 2.0A (62mΩ on-resistance) Single Channel Current-limited Power Switch
- UL File Number E328191
|
USB Bus Power Input |
-
12V Step-Down to 5V from either PCIe 12V or Power Connector 12V (J1: ATA 4-pin or J2: SATA 15-pin)
The USB Bus power (5V) are step-down from 12V and the
12V input might from either PCIe Edge Connector or
Auxiliary Power Connectors (J1 & J2).
Note:
If the PCIe Slot can’t supply 12V current high enough then you have to
attach the Auxiliary Power from either J1 (ATA 4-pin) or J2 (SATA 15-pin).
|
