Highlights
  • Host Bus: PCIe x2 Gen2 (10 Gbps)
  • Supports four SATA III (6 Gbps) ports
  • Hardware RAID
  • Supports Low Profile PCI form factor
Introduction

The S3-PCIE2XG204 is 4-port SATA III (6 Gbps) Hardware RAID to PCI Express x2 Gen2 Host Card .

The S3-PCIE2XG204 provides Four SATA III (6 Gbps) ports.

The S3-PCIE2XG204, x2 PCI Express to four ports of Serial ATA, enables Serial ATA PHY up to 6Gbps high speed interface, following Serial ATA Revision 3.0 specification.
Technical Specifications

 

PCI Express Features
  • Compliant with 10Gbps x2 PCI Express 2.0
  • Supports two lane of PCI Express

SATA Features

  • Compliant with Serial ATA Specification 3.0
  • Supports SATA III transfer rate of 6.0Gbps
  • Supports SATA HDD, SSD, Optical Drive and Blu-Ray Drive
  • Supports ATA and ATAPI commands
  • Supports Native Command Queuing (NCQ)
  • Supports max one SATA FIS-based or Command-based Port Multiplier and max 4 non-Raid individual HDD or SSD connected to Port Multiplier
  • Supports totally max 7 drives connected
  • SATA Hot-plug capability
LED Pin headers on board for HDD LED connection
Number of Ports:
  • Four SATA ports
Computer Platform

Computer with PCI Express slot (x2, x4, x8, x16)
Operating System Requirements
  • OS Built-in AHCI inbox driver natively in Windows 10, Win8, Win7, Vista, 2008, 2012, Linux, Mac 10.x and later, no additional driver required
  • Provides Windows XP driver
  • Legacy BIOS ROM on board support OS Booting & RAID Configuration on Windows and Linux
  • Provides Windows & Mac & Linux GUI to configure and monitor Hardware RAID0, RAID1, RAID 10 on attached drives directly to this Card
  • Not support connected boot drive if UEFI only MainBoard that no CSM enable option
Physical Dimensions
  • 50mm(H)x69mm(L)
  • NW: 49.6g