U31-PCIE2XG322 2-port USB 3.1 PCI Express x2 Gen 3 Host Card

Highlights

PCIe to USB 3.2 Gen 2 Host Controller
- Upstream Port: PCIe 4-lane Gen 3 (8.0GT/s)
- Downstream Ports:
  - Two USB 3.2 Gen 2 (10Gbps): Std-A ports
  - Two USB 2.0 (HS/FS/LS): 2-in-1 Internal 9-pin header
The Vbus of each USB Port has a 2.0A Single Channel Current-Limited Power Switch for protection (IC-S0371-08H)

2.0A (72mΩ on-resistance) Single Channel Current-limited Power Switch
UL File Number E169910

Provides USB 3.0 Vision Standard cable port lock mechanism
Support Low Profile PCI Form Factor

Introduction

U31-PCIE4XG331-13 is a 2-port (Std-A) USB 3.2 Gen 2 (10Gbps) to PCIe x4 Gen 3 Host Card.

U31-PCIE4XG331-13 is designed with the new generation Universal Serial Bus xHCI host controller, bridging PCI Express to USB 3.2 Gen 2, compliant with Universal Serial Bus 3.2 Specification and Intel eXtensible Host Controller Interface (xHCI) specification revision 1.1.

U31-PCIE4XG331-13 supports two USB 3.2 Gen 2 (10Gbps) and two USB 2.0 (HS/FS/LS), performing ultra-high-speed bandwidth with PCIe Gen 3 x4 support.

Technical Specifications

PCIe Host Bus	PCI Express 4-lane Gen 3 (8.0 GT/s) Compliant with PCI Express Base Specification Revision 3.1 Support up to 512-Byte Max Payload Size Support for Common Reference Clock and Separate Reference Clocks (SRNS and SRIS) Supports PCIe Precision Time Measurement (PTM) Comprehensive PCIe 3.1 LPSS (Low Power Sub States) power management
USB Features	Supports two USB 3.2 Gen 2 ports and two USB 2.0 ports Up to USB 3.2 Gen 2 10Gbps & USB 2.0 (HS/FS/LS) 480Mbps transfer rate Compliant with Universal Serial Bus 3.2 Specification Compliant with Universal Serial Bus Specification Revision 2.0
Number of USB Ports	Two USB 3.2 Gen 2 Cable Ports (Std-A Receptacle) One USB 2.0 2-in-1 Internal 9-pin header The Vbus of each USB Port has a 2.0A Single Channel Current-Limited Power Switch for protection (IC-S0371-08H) 2.0A (72mΩ on-resistance) Single Channel Current-limited Power Switch UL File Number E169910
USB3 cable lock mechanism	Provides the threaded holes for the jack-screws of USB 3.2 A Plug w/Jackscrew lock Cable
USB Bus Power Input	The USB Bus power (5V) are step-down from 12V and the 12V input might from either PCIe Edge Finger or Auxiliary Power Connectors (J1 & J2). Note: If the PCIe Slot can’t supply 12V current high enough then you have to attach the Auxiliary Power from either J1 (ATA 4-pin) or J2 (SATA 15-pin).

Computer Platform

Computer with PCI Express slot ( x4, x8, x16)

Note:
For the best performance, It should be installed in a PCIe Gen 3 compliant slot in the host computer.

Operating System Requirements

Inbox driver for Windows 10 later, Linux (kernel 4.x.x later)

Physical Dimensions

64 mm(H)x80mm(L)
NW: 45.8g