Highlights
  • 5.25” ODD form factor  (Reserved space for 2.5" and/or 3.5" SATA HDD)
  • Good support for SSD
  • Supports 3-port 3.0Gbps SATA II interface
  • Provides power & Access LEDs for each HDD
  • Supports various RAID
    • Large (Big drive)
    • RAID 0 (Stripping)
    • RAID 1 (Mirroring)
    • Port Multiplier
  • Provides RAID setting Rotary switch in the front panel
  • Provides Buzzer for RAID error warning
Introduction

iMirror525A is a Dual SATA RAID Storage Module for two 2.5” and/or 3.5" SATA HDD
A true hardware RAID solution, iMirror525A requires no software to be installed on your machine
It provides 4 hardware RAID mode:

  • Large (Big drive)
  • RAID 0 (Stripping)
  • RAID 1 (Mirroring)
  • Port Multiplier

iMirror525A delivers the performance and data protection capabilities required for workstations and high-end
desktops.
With the high-speed transfer rate at 3.0 Gbs (300MB/s) provided by SATA II, iMirror525A truly offers the
unmatchable I/O performance to its users.

Technical Specifications
I/O Interface SATA
RAID Level
  • Large (Big drive)
  • RAID 0 (Stripping)
  • RAID 1 (Mirroring)
  • Port Multiplier
Status LEDs
  • Power, RAID Status LEDs
  • SATA Link & Activity, Error Indicator LEDs
RAID Configuration
  • RAID Mode Rotary Switch
  • Change Mode Button
Alarm Buzzer Buzzer for RAID error alarm
Storage Type 2.5” and/or 3.5" SATA SSD/HDDs
DC Power Mini 4-pin Floppy Disk Drive like power Connector
Form Factor 5.25” ODD (Optical Disk Drive) form factor
Dimension 146.6(W) x 42(H) x 120(D) mm
Available Models
  • iMirror525A1 (Reserved space for one 3.5" or 2.5" SATA HDD)

  • iMirror525A2 (Reserved space for two 2.5" or 2.5"+3.5" SATA HDD)

Kit includes

iMirror525A1

  • iMirror525A1 Subsystem
  • CB-00072 --- Y-Shape DC Power Cable
  • Two CB-00334 --- SATA plug to SATA plug Signal Cable with latch L=50cm
  • CB-00334-01--- SATA plug to SATA plug Signal Cable with latch L=20cm
  • Two CB-00194--- IDE Big power 4 pin male plug Connector to One SATA 15 pin power Connector (L=15 cm)
  • Four SC-00002 (for iMirror525A)--- Screws (M3x5)
  • Four SC-00022 (for 2.5" HDD)--- Screws (M3x4)
  • Four SC-00064 (for 3.5" HDD)--- Screws (6#32x6 )
  • CD-title (RAID Manager Utility )
  • User's Guide

iMirror525A2

  • iMirror525A2 Subsystem
  • CB-00072 --- Y-Shape DC Power Cable
  • CB-00334 --- SATA plug to SATA plug Signal Cable with latch L=50cm
  • Two CB-00334-01--- SATA plug to SATA plug Signal Cable with latch L=20cm
  • Two CB-00194--- IDE Big power 4 pin male plug Connector to One SATA 15 pin power Connector (L=15 cm)
  • Four SC-00002 (for iMirror525A)--- Screws (M3x5)
  • Six SC-00022 (for 2.5" HDD)--- Screws (M3x4)
  • Four SC-00064 (for 3.5" HDD)--- Screws (6#32x6 )
  • CD-title (RAID Manager Utility )
  • User's Guide