• USB 3.0 Compliant Hub, TID# 330000037
• Supports USB 3.0 SuperSpeed (5Gbps), USB 2.0 Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)
• Supports one upstream port and four downstream ports
  • One upstream USB 3.1 cable port (Standard B-type Receptacle Connector), TID# 360000002
  • Four downstream USB 3.1 cable ports (Standard A-type Receptacle Connector), TID# 360000006
• Supports Spread Spectrum Clock (SSC)
• Multi Transaction Translator (MTT) Hub: Four Transaction Translators, One Per Port
• No Special Driver Requirements; Works Seamlessly With Any Operating System With USB Stack Support

U3H414SH is a high-performance four-port Universal Serial Bus (USB) 3.0 compliant Hub.

U3H414SH allows for a maximum data transfer rate of up to 5Gbps, or ten times the throughput available to USB 2.0 based devices. Other enhancements provide for improved interaction between device and host controller, including important advancements in power management.

U3H414SH provides simultaneous SuperSpeed USB and High-Speed/Full-Speed connections on the upstream port and provides SuperSpeed (5Gbps) USB, High-Speed (480Mbps), Full-Speed (12Mbps), or Low-Speed (1.5Mbps) connections on the downstream ports. When the upstream port is connected to an electrical environment that only supports High-speed or Full-speed/Low-speed connections, SuperSpeed USB connectivity is disabled on the downstream ports. When the upstream port is connected to an electrical environment that only supports Full-speed/Low-speed connections, SuperSpeed USB and High-speed connectivity are disabled on the downstream ports.

• USB 3.0 Compliant Hub, TID# 330000037
  • Upstream Port Supports SuperSpeed USB, High-Speed and Full-Speed Connections
  • Supports Four Downstream Ports
  • Each of the Four Downstream Ports Support SuperSpeed USB, High-Speed, Full-Speed/Low-Speed Connections
• USB 2.0 Hub Features
  • Multi Transaction Translator (MTT) Hub: Four Transaction Translators, One Per Port
  • Four Asynchronous Endpoint Buffers Per Transaction Translator (TT) for Better Throughput Than the USB Required Minimum of Two Buffers Per TT
• Downstream Port Configuration:
  • Enabled all Downstream Port
  • Marked as Removable
  • Battery Charging Disabled
• DC power input: U3H414SH is self-power device and needs DC 5V power.
  • Floppy drive like mini-4pin power connector
  • Big IDE 4-pin DC power connector
• Supports Spread Spectrum Clock (SSC)
• Provides USB 3.0 cable port lock mechanism
  • Upstream (Standard B-type Receptacle) USB3.0 cable lock mechanism

• 91.5mm (W) x 90.5mm (D)
• Form Factor
  • SCSI I 50pin Low Density Centronics Connector
  • Fit to most standard SCSI enclosure
• NW:66.8g

• U3H414SH 4 port USB 3.0 Hub