U2-IDEMR02 combines two key components:
1). USB 2.0 to ATA Bridge Board
2). Plastic and Mechanism
1). USB 2.0 to ATA Bridge Board:
- IDE (ATA/ATAPI) Interface: 64pin DIN Female Connector
- USB 2.0 Interface: One USB B-Type connector
- USB Bus Transfer Rate: High Speed (480 Mbit) And Full Speed (12 Mbit)
- USB Bus Power: Self Powered Mode Operation
- High Speed indicator LED and HDD Access LED
- DC Power Connector: Standard big 4-pin IDE power Connector
- USB 2.0 to ATA Native Bridge Controller: Ali M5621
- Complies with T13's ATA/ATAPI-6 Draft Specification:
- PIO Mode 0 ~ 4
- Multiword DMA Mode 0 ~ 2
- Ultra DMA Mode 0 ~ 4
- Supports 48-bit addressing for large hard drives (>128GB).
2). Physical and Mechanical Specification
- Frame of U2-IDEMR02 designed to fit the standard dimension of 5.25" device bay of the computer case
- Inner HDD tray provides screw holes for 3.5" SATA/ATA HDD
- Inner HDD tray and mounting frame made by aluminum: good for heat dissipation
- Easy-to-Eject pull handle with miniature key lock
- Key lock + Power Switch allow U2-IDEMR02 Hot-swappable
- Power indicator LED and HDD Access LED
- Provide three kinds of HDD Mobile Tray:
- 3.5" ATA HDD Mobile Tray (default)
- 2.5" ATA HDD Mobile Tray
- 3.5"/2.5" Serial ATA HDD Mobile Tray
For 2.5" ATA HDD For 3.5" ATA HDD For 3.5"/2.5" SATA HDD
Notes:
- EC-00104 (beige color) Mobile Tray is for 3.5" ATA HDD
- EC-00056 (black color) Mobile Tray is for 3.5" ATA HDD
- IDE-SATAMT01a (beige color) Mobile Tray is for 3.5" Serial ATA HDD
- IDE-SATAMT01b (black color) Mobile Tray is for 3.5" Serial ATA HDD
- 35-25MT01a (beige color) Mobile Tray is for 2.5" ATA HDD
- 35-25MT01b (black color) Mobile Tray is for 2.5" ATA HDD