Highlights
  • Support 3.5" (or 2.5") SATA I,II,III, SAS I, II , performace up to 6Gbps
  • Support SATA and also SAS primary Channel
  • Providingdifferent mounting holes on both side
  • Easy drives swap in/out or for transportation
  • Side sliding rails with vibration reducing springs
  • With big cooling fans, high/low speed
  • Double security with metal key lock and sliding lock design
  • Switch mode LED indication design
Introduction

SATAMR5352T allow to install five 3.5" (or 2.5") SATA/SAS HDDs. The size of the product is the same as a Optical Disk Drive, and can be put into a standard 5.25" mechanics. So, it is a creation of convenient storage equipment for the increasingly advanced personal computer.

The traditional way to reduce vibration impact is mainly through cushion device. This is the reason why connector and HDD crash down when aborbing too much power. We use Spring-Rail to supplement the structure's damping to dissipate energy and to control undesired structural vibrations from different directions. No matter how strong the effect is, this design makes inner trays fluctuate only in a limited range. The connector and HDD inside can be protected safe and sound.

.

This rail-way is specially designed for the connection between the tray and the frame.
Each rail is with two resilient touch points and each tray is needed to walk on the two rails at both sides.
Technical Specifications
Material
  • All aluminum body and front panel
  • Providing different mounting holes on both side
  • Side sliding rails with vibration reducing springs
HDD Bay / Type
  • Allow to install 5 x 3.5" (or 2.5") SATA or SAS HDD or SSDs
  • Support SATA I,II,III, SAS I, II, performance up to 6Gbps
  • Support SATA and also SAS primary channel
  • With 5 individual carrier for easy swapping in/out
  • Multi-bay backplane for 3.5" & 2.5" HDD(SSD) data transferring solution
  • Easy drives swap in/out or for transporation
Required space
  • 3 x 5.25" ODD Form Factor

Front Panel

Individual LED
  • For Drives: Power on(Green), Access(Orange)
  • For Fan: Failure(Red slow-blinking), Overheating(Red fast-blinking)
Lock
  • Double security with metal key lock and sliding lock design
     ( for better security ! Reach industrial-level standard )

Back Panel

Switch
  • High/Low Fan control Fan switch
  • HDD accessing On/Off Control LED switch
Jumper
  • With extending LED functioning jumper for external connection
Fan
  • 1 x Cooling Fans (8x8cm)
Host connection
  • 5 x 7pin SATA
Power connector
  • 2 x 15Pin SATA

 
Physical Dimensions
  • 217(L)x146(W)x126(H)cm
  • Weight :1.81kgs
Certifications
Kit includes
  • SATAMR5352T Mobile Rack
    • Two Key
    • Screws