• Five PCIe Gen 4 x16 Slots
  • One PCIe x16 Slot (J5) for Target Cable Adapter
  • Four PCIe x16 (x4 mode) Slots (J1~J4) for Add-in Card
    • Support dual slot/dual width card
• ATX Form Factor
  • Dimensions: 304.8(W) x 170.3(L) mm
  • Support ATX Mounting holes (A, B, C, F, G, H, J, S)
• It needs ATX Case with more than 9 expansion slots

PCIEX16D05-9 is PCIe x16 to four PCIe x16 (x4 mode) Expansion Docking Board.

Requires an target adapter card in the host interface card slot. The PCIe x16 5-slot Docking Board supports up to four PCIe x1/ x4/ x8 /x16 add-in Cards.

• One PCIe x16 Slot (J5) for Target Cable Adapter
• Four PCIe x16 (x4 mode) Slots (J1~J4) for Add-in Card
  • Support dual slot/dual width card
• Power Connector: ATX 24-Pin Power Connector and ATX 8-Pin Power Connector
• PWR ON connector : JST compatible wafer 2pin (pitch=2.5mm) connector
  • Allows the upstream host to turn on the downstream sub-system's power
  • For auto-switch you may use a cable (CB-00711) to join both PCIEX16D05-9 and Target cable adapter PWR ON connectors
• Pin Header: Power switch / Power LED
• FAN Power Connector : JST compatible wafer 3pin (pitch=2.54mm) connector
• J1 ~J4 Slot PCIe REFCLK Setting Switch
  
• SMbus Slave Address Setting Switch
  
• Dimensions
• 304.8(W) x 170.3(L) mm
• It suits for ATX Form Factor Mounting
• NW: 270.6g

Note: The Target Cable Adapter must have PCIe REFCLK output.

If you use Target Cable Adapter as below, please be noted that your mainboard needs to have PCIe bifurcation mode support.

• EPCIE16XRDCA02A---External PCI Express (Two SFF-8644 1x2) to PCIe x16 Gen 3 Active (Redriver with Linear Equalization) Cable Adapter Card
  • Provide PWR ON connector
• EPCIE16XG4RDCA02---External PCI Express (Two SFF-8644 1x2) to PCIe x16 Gen 4 Active (Redriver with Linear Equalization) Cable Adapter Card
  • Provide PWR ON connector

• CB-00711---JST Wafer 2pin Cable; Pitch=2.5mm, 26AWG, , L=30cm