U31-PCIE2XG322 2-port USB 3.1 PCI Express x2 Gen 3 Host Card

Highlights

Host Bus: PCIe x4 (x2 mode) Gen 3 ; Low Profile PCI Form Factor

Compliant with PCI Express Base Specification Revision 3.0

2-port USB 3.1 Host Controller (Asmedia ASM3142, USB IF TID 5080000010) for U31-PCIE2XG322 (Rev 1.2.0 or later)

Compliant with Universal Serial Bus 3.1 specification Revision 1.0
Compliant with Intel’s eXtensible Host Controller Interface (xHCI) specification Revision 1.1
Supports Multiple INs function
- It improves the efficiency of the data transfer on its USB port, when host connecting to USB 3.1 Gen2 Hub with several USB 3.1 Gen1 devices

The Vbus of each USB Port has a 2.0A Single Channel Current-Limited Power Switch for protection

2.0A (70mΩ on-resistance) Single Channel Current-limited Power Switch
UL File Number E322375

Provides USB 3.0 Vision Standard cable port lock mechanism

Introduction

U31-PCIE2XG322 is a 2-port USB 3.1 Gen-II (10Gbps) to PCI Express x4 (x2 mode) Gen 3 Host Card.
U31-PCIE2XG322 is designed with the new generation Universal Serial Bus XHCI host controller, bridging PCI Express to USB3.1 Gen-II, compliant with USB 3.1 Specification Revision 1.0 and Intel eXtensible Hot Controller Interface specification revision 1.1.
U31-PCIE2XG322 (Rev 1.2.0) also supports the new feature of USB 3.1 Gen2, named Multiple INs to achieve fully utilization rate of 10Gbps data rate, tacking advantage of the available bandwidth of USB 3.1 Gen2 bus.
U31-PCIE2XG322 supports two USB 3.1 Gen-II (10Gbps) ports and perform trusting high speed bandwidth with PCIe Gen-III x2 supporting. It also supports backward compatible with legacy USB function and devices, compliant with UASP (USB Attach SCSI Protocol) Revision 1.0, supporting the XHCI debug capability.

Technical Specifications

PCIe Host Bus	Support PCI Express Gen-III x2 Support high bandwidth performance with low latency Support PCI Express Link power management Compliant with PCI Express Base 3.0 Specification Compliant with PCI Express card Electromechanical 2.0 specification Compliant with PCI Express Mini Card Electromechanical 1.2 specification Compliant with PCI Bus Power Management Interface Specification Revision 1.2 Compliant with PCI Local Bus Specification Revision 3.0 Integrate Spread Spectrum Controller for PCI Express interface Overclock capability on PCI Express bus
USB Features	Support two ports of USB 3.1 Up to USB3.1 Gen-II 10Gbps Compliant with Universal Serial Bus 3.1 Specification Revision 1.0 Compliant with Universal Serial Bus Specification Revision 2.0 Compliant with USB Attached SCSI Protocol Revision 1.0 Support Multiple INs function for U31-PCIE2XG322 (Rev 1.2.0 or later) Support USB3.1 and USB2.0 Link Power Management Support Control, Bulk, Stream, Interrupt, Isochronous transfer type Support independent port power control Support overcurrent detection Integrate Spread Spectrum Controller for USB 3.1 interface Backward compatible with Legacy USB function and device Support the Debugport
Number of USB Ports	Two USB 3.1 Cable Ports (A-type Receptacle, USB IF TID 360000006)
USB3 cable lock mechanism	Provides the threaded holes for the jack-screws of USB 3.1 A Plug w/Jackscrew lock Cable
USB Bus Power Input	U31-PCIE2XG322-10: USB bus power is from PCIe 12V (Step-Down) U31-PCIE2XG322-13: USB bus power may from the following source (A or B): A. From PCIe 12V (Step-Down) B. From Power Connector (IDE 4-pin or SATA 15-pin)

Available Models

U31-PCIE2XG322-10 Without Power Connector	U31-PCIE2XG322-13 With Power Connectors

Computer Platform

Computer with PCI Express slot ( x4, x8, x16)

Note:
For the best performance, It should be installed in a PCIe Gen 3 compliant slot in the host computer.

Operating System Requirements

Inbox driver for Windows 8 later, Linux (kernel 3.x.x later)

Certifications

CE Test: Pass
UKCA Test: Pass
FCC Test : Pass
VCCI Test: Pass
RCM Test: Pass

Physical Dimensions

64 mm(H)x80mm(L)
NW: 50g